• Under our terms and condition of sales any service or spares parts have a non cancellation and non refundable policy.
• You can get the spare parts you need at any time by stating the product type and serial number.

• Under our terms and condition of sales any service or spares parts have a non cancellation and non refundable policy.
• You can get the spare parts you need at any time by stating the product type and serial number.

• Under our terms and condition of sales any service or spares parts have a non cancellation and non refundable policy.
• You can get the spare parts you need at any time by stating the product type and serial number.

• Use
  • Heating Waxes, plastics and liquids etc
• Capacity
  • 200 x 200 hot plate surface
• Construction
  • 304 Stainless Steel Outer and top plate with Rockwool insulation
• Heating
  • ATEX approved 240v 500w immersion heater in 20l heat transfer oil. IP66
• Oil Level
  • The heat transfer oil level is indicated on a separate supplied dipstick.
• Mobility
  • This unit has been designed to be a fixed appliance.
• Power Cables
  • The Heater is fitted with one off 5m flexible armoured cables and fitting of appropriate plugs. Cables are terminated in the Heater electrics via ATEX approved glands.
• Certificates
• Standards
  • EN60079-0:2004, EN60079-1:2004, EN600-7:2003+Amendment 1, IEC61241-0:2004, IEC61241-1:2004 (GLAND),  IEC60079-0:2004, IEC60079-1:2003, IEC 61241-0:2004, IEC 61241-1:2004, EN 50014:1997, EN 50018:1994, EN50281-1-1:1998, CEI 61241-1-1:1999, EN60079-1:2004, EN61241-0:2006, (ELEMENT), EN50014:1997, EN 50018:1994 EN 50019:1994, EN50013:1994.

    (PLUG)

• Temperature Control
  • Thermostats built into flameproof heaters set to 150ºC +/- 5ºC.
• Over Temperature Control
  • There are two over temperature thermostats located in the head of the element on for the element head temperature set at 80°C. The second over temperature cut out is for the element/oil temperature, this is set to 175°C. Both these stats, in the event of a unit going over temperature, will need to be re-set manually by pressing the red button. A “click” should be heard on re-set.
• Dimensions
  • Heater 575mm Long, 250mm Wide, 250mm High
• Weight
  • 50Kg
• Ex Markings
  • II2G D Exde IIC T3/ EX tb IIIC T-20°C ≤ TAMB≥ +40°C
• Rating (electrical) 
  • 240V 500W
• Temperature Range
  • -20ºC to + 40ºC

Technical Data