The 2860SR and 2860EB temperature controllers can be combined with all type ET precision hotplates. The temperature is set on the microprocessor-controlled digital instrument in increments of 0.1°C up to 99.9°C and in increments of 1°C above 100°C. The set temperature is maintained even after the device is switched off. Setpoint programming is only possible via a two-finger operation to prevent accidental temperature adjustment by pressing only one key. After releasing the keys, the actual temperature is constantly displayed by 14 mm high digits.
With the continuously operating electronic power controller, the heating power can be adjusted to the heat required to prevent overshooting of the set temperature or reheating. The temperature is measured by the built-in quick-reaction PT 100 sensor of the hotplate.
Type 2860SR - design as a table-top device
Type 2860EB - as slight-in module for work-benches. The required screws are included with the unit.
|Voltage||V/ Hz||220...240 /50-60||220...240 /50-60|
|Control Characteristics||Two Point With Performance Adjustment||Two Point With Performance Adjustment|
|Height of Digits||mm||14||14|
|Cable Length Standard||m||1.8||1.8|
|Overall Dimensions (w x d x h)||mm||200 x 65 x 280||215 x 70 x 168|
ManufacturerHarry Gestigkeit GmbH
Country of OriginGermany
TypeTable Top, Slight-In Module For Work Benches