-
Astell Scientific AMB420BT Benchtop Autoclave, 33 Litres, Classic Steam Source, Single Phase 230 volts, 13 Amps, 50/60Hz
Astell’s front loading Benchtop autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply.
‘Classic’ and ‘Autofill’ models are available.
Classic - The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.
Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle.Model No Steam Source Volume
(Litres)Power Supply Chamber dia x depth (mm) Overall Dims wxhxd (mm) AMB420BT Classic 33 Single Phase 230 volts, 13 Amps, 50/60Hz 350 x 360 520 x 540 x 780 -
Astell Scientific AMB220BT Benchtop Autoclave, 33 Litres, Autofill Steam Source, Single Phase 230 volts, 13 Amps, 50/60Hz
Astell’s front loading Benchtop autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply.
‘Classic’ and ‘Autofill’ models are available.
Classic - The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.
Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle.Model No Steam Source Volume
(Litres)Power Supply Chamber dia x depth (mm) Overall Dims wxhxd (mm) AMB220BT Autofill 33 Single Phase 230 volts, 13 Amps, 50/60Hz 350 x 360 520 x 540 x 780 -
Astell Scientific AMB230BT Benchtop Autoclave, 43 Litres, Autofill Steam Source, Single Phase 230 volts, 13 Amps, 50/60Hz
Astell’s front loading Benchtop autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply.
‘Classic’ and ‘Autofill’ models are available.
Classic - The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.
Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle.Model No Steam Source Volume
(Litres)Power Supply Chamber dia x depth (mm) Overall Dims wxhxd (mm) AMB230BT Autofill 43 Single Phase 230 volts, 13 Amps, 50/60Hz 350 x 460 520 x 540 x 780 -
Astell Scientific AMB240BT Benchtop Autoclave, 63 Litres, Autofill Steam Source, Single Phase 230 volts, 13 Amps, 50/60Hz
Astell’s front loading Benchtop autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply.
‘Classic’ and ‘Autofill’ models are available.
Classic - The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.
Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle.Model No Steam Source Volume
(Litres)Power Supply Chamber dia x depth (mm) Overall Dims wxhxd (mm) AMB240BT Autofill 63 Single Phase 230 volts, 13 Amps, 50/60Hz 350 x 660 520 x 540 x 980 The AMB240 is rated at 3kW. The heat dissipation is estimated at 0.5kWh or approximately 1,700 BTU for an overall cycle time of 3½ hours.
-
Astell Scientific AMA440BT Classic Top Loading Compact Autoclave, 63 Litres, Heaters in Chamber, Single Phase 230 volts, 13 Amps, 50/60Hz
The 63 litre 'Compact' top loading autoclaves are floor standing self-contained sterilizer units that require no plumbing and operate from a standard single phase power supply. All compact autoclaves are fitted with castors for easy movement.
Available in two versions; they are idea for a medical application, for sterilizing tall items, or in any situation where space is at a premium. ‘Classic’ and ‘Ecofill’ models are available.
Model No. Source Volume (Litres) Power Supply Chamber dia x depth mm Overall Dims wxhxd AMA440BT
Heaters in Chamber
63
Single Phase 230 volts, 13 Amps, 50/60Hz
350 x 640
530 x 1040 x 700
-
Astell Scientific AMA240BT Autofill Top Loading Compact Autoclave, 63 Litres, Heaters in Chamber, Single Phase 230 volts, 13 Amps, 50/60Hz
The 63 litre 'Compact' top loading autoclaves are floor standing self-contained sterilizer units that require no plumbing and operate from a standard single phase power supply. All compact autoclaves are fitted with castors for easy movement.
Available in two versions; they are idea for a medical application, for sterilizing tall items, or in any situation where space is at a premium. ‘Classic’ and ‘Ecofill’ models are available.
Model No. Source Volume (Litres) Power Supply Chamber dia x depth mm Overall Dims wxhxd AMA240BT
Heaters in Chamber
63
Single Phase 230 volts, 13 Amps, 50/60Hz
350 x 640
530 x 1040 x 700
-
Julabo 9800031 HT30-M1 High Temperature Circulators Forte HT, +70 ... +400°C, 14-18 Pump capacity flow rate (l/min)
Technical Data
Order No. 9800031 Category High Temperature Circulators Forte HT Working temperature range (°C) +70 ... +400 Temperature stability (°C) ±0.01-0.1 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display LCD , LED Heating capacity (kW) 3 Pump capacity flow rate (l/min) 14-18 Pump capacity flow pressure (bar) 0.8-1.2 Pump connections M16x1 Filling volume (liters) 2 External Pt100 sensor connection integrated Digital interfaces RS232
RS485
Optional ProfibusAnalog connection input / output Yes Ambient temperature 5...40 °C Dimensions W x L x H (cm) 23 x 23 x 58 Weight (kg) 27 Classification according to DIN12876-1 Classification III (FL) Display for pump pressure and filling volume Backlit indicator Filling volume expansion vessel liters 1.6+0.9 Dimensions Control unit B x T x H 25 x 25 x 18 JULABO High Temperature Circulators can be used for temperature applications up to +400 °C. The units provide powerful heating capacities for shortest heat-up times and rapid compensation of exothermic and endothermic reactions. The closed construction prevents oil fumes even at high temperatures. The units provide automatic heat-up and cracking protection to ensure long life-time of the bath fluid. The filling system automatically purges the fluid system of air. Units with model designation ‚C.U.‘ are equipped with a powerful cooling unit for tap water connection. This allows for temperature applications already at +20 °C and for rapid cooling. Typical applications: Reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities.
-
Julabo 9800035 HT30-M1-CU High Temperature Circulators Forte HT, +40 ... +400°C, 14-18 Pump capacity flow rate (l/min)
Technical Data
Order No. 9800035 Category High Temperature Circulators Forte HT Working temperature range (°C) +40 ... +400 Temperature stability (°C) ±0.01-0.1 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display LCD , LED Heating capacity (kW) 3 Cooling capacity °C 20 kW 15 Pump capacity flow rate (l/min) 14-18 Pump capacity flow pressure (bar) 0.8-1.2 Pump connections M16x1 Filling volume (liters) 2 External Pt100 sensor connection integrated Digital interfaces RS232
RS485
Optional ProfibusAmbient temperature 5...40 °C Dimensions W x L x H (cm) 43 x 23 x 58 Weight (kg) 35 Classification according to DIN12876-1 Classification III (FL) Display for pump pressure and filling volume Backlit indicator Filling volume expansion vessel liters 1.6+0.9 Dimensions Control unit B x T x H 25 x 25 x 18 JULABO High Temperature Circulators can be used for temperature applications up to +400 °C. The units provide powerful heating capacities for shortest heat-up times and rapid compensation of exothermic and endothermic reactions. The closed construction prevents oil fumes even at high temperatures. The units provide automatic heat-up and cracking protection to ensure long life-time of the bath fluid. The filling system automatically purges the fluid system of air. Units with model designation ‚C.U.‘ are equipped with a powerful cooling unit for tap water connection. This allows for temperature applications already at +20 °C and for rapid cooling. Typical applications: Reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities
-
Julabo 9800062 HT60-M2 High Temperature Circulators Forte HT, +70 ... +400°C, 14-18 Pump capacity flow rate (l/min)
Technical Data
Order No. 9800062 Category High Temperature Circulators Forte HT Working temperature range (°C) +70 ... +400 Temperature stability (°C) ±0.01-0.1 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display LCD , LED Heating capacity (kW) 7 Pump capacity flow rate (l/min) 14-18 Pump capacity flow pressure (bar) 0.8-1.2 Pump connections M16x1 Filling volume (liters) 2 External Pt100 sensor connection integrated Digital interfaces RS232
RS485
Optional ProfibusAnalog connection input / output Yes Ambient temperature 5...40 °C Dimensions W x L x H (cm) 23 x 23 x 58 Weight (kg) 29 Classification according to DIN12876-1 Classification III (FL) Display for pump pressure and filling volume Backlit indicator Filling volume expansion vessel liters 1.6+0.9 Dimensions Control unit B x T x H 25 x 25 x 18 JULABO High Temperature Circulators can be used for temperature applications up to +400 °C. The units provide powerful heating capacities for shortest heat-up times and rapid compensation of exothermic and endothermic reactions. The closed construction prevents oil fumes even at high temperatures. The units provide automatic heat-up and cracking protection to ensure long life-time of the bath fluid. The filling system automatically purges the fluid system of air. Units with model designation ‚C.U.‘ are equipped with a powerful cooling unit for tap water connection. This allows for temperature applications already at +20 °C and for rapid cooling. Typical applications: Reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities.
-
Julabo 9800065 HT60-M2-CU High Temperature Circulators Forte HT, +40 ... +400°C, 14-18 Pump capacity flow rate (l/min)
Technical Data
Order No. 9800065 Category High Temperature Circulators Forte HT Working temperature range (°C) +40 ... +400 Temperature stability (°C) ±0.01-0.1 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display LCD , LED Heating capacity (kW) 7 Cooling capacity °C 20 kW 15 Pump capacity flow rate (l/min) 14-18 Pump capacity flow pressure (bar) 0.8-1.2 Pump connections M16x1 Filling volume (liters) 2 External Pt100 sensor connection integrated Digital interfaces RS232
RS485
Optional ProfibusAmbient temperature 5...40 °C Dimensions W x L x H (cm) 43 x 23 x 58 Weight (kg) 35 Classification according to DIN12876-1 Classification III (FL) Display for pump pressure and filling volume Backlit indicator Filling volume expansion vessel liters 1.6+0.9 Dimensions Control unit B x T x H 25 x 25 x 18 JULABO High Temperature Circulators can be used for temperature applications up to +400 °C. The units provide powerful heating capacities for shortest heat-up times and rapid compensation of exothermic and endothermic reactions. The closed construction prevents oil fumes even at high temperatures. The units provide automatic heat-up and cracking protection to ensure long life-time of the bath fluid. The filling system automatically purges the fluid system of air. Units with model designation ‚C.U.‘ are equipped with a powerful cooling unit for tap water connection. This allows for temperature applications already at +20 °C and for rapid cooling. Typical applications: Reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities.
-
Julabo 9800063 HT60-M3 High Temperature Circulators Forte HT, +70 ... +400°C, 14-18 Pump capacity flow rate (l/min)
Technical Data
Order No. 9800063 Category High Temperature Circulators Forte HT Working temperature range (°C) +70 ... +400 Temperature stability (°C) ±0.01-0.1 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display LCD , LED Heating capacity (kW) 6 Pump capacity flow rate (l/min) 14-18 Pump capacity flow pressure (bar) 0.8-1.2 Pump connections M16x1 Filling volume (liters) 2 External Pt100 sensor connection integrated Digital interfaces RS232
RS485
Optional ProfibusAnalog connection input / output Yes Ambient temperature 5...40 °C Dimensions W x L x H (cm) 23 x 23 x 58 Weight (kg) 29 Classification according to DIN12876-1 Classification III (FL) Display for pump pressure and filling volume Backlit indicator Filling volume expansion vessel liters 1.6+0.9 Dimensions Control unit B x T x H 25 x 25 x 18
JULABO High Temperature Circulators can be used for temperature applications up to +400 °C. The units provide powerful heating capacities for shortest heat-up times and rapid compensation of exothermic and endothermic reactions. The closed construction prevents oil fumes even at high temperatures. The units provide automatic heat-up and cracking protection to ensure long life-time of the bath fluid. The filling system automatically purges the fluid system of air. Units with model designation ‚C.U.‘ are equipped with a powerful cooling unit for tap water connection. This allows for temperature applications already at +20 °C and for rapid cooling. Typical applications: Reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities.
-
Julabo 9800066 HT60-M3-CU High Temperature Circulators Forte HT, +70 ... +400°C, 14-18 Pump capacity flow rate (l/min)
Technical Data
Order No. 9800066 Category High Temperature Circulators Forte HT Working temperature range (°C) +40 ... +400 Temperature stability (°C) ±0.01-0.1 Setting / display resolution 0.01 °C Integrated programmer 6x60 steps Temperature Display LCD , LED Heating capacity (kW) 6 Cooling capacity °C 20 kW 15 Pump capacity flow rate (l/min) 14-18 Pump capacity flow pressure (bar) 0.8-1.2 Pump connections M16x1 Filling volume (liters) 2 External Pt100 sensor connection integrated Digital interfaces RS232
RS485
Optional ProfibusAmbient temperature 5...40 °C Dimensions W x L x H (cm) 43 x 23 x 58 Weight (kg) 35 Classification according to DIN12876-1 Classification III (FL) Display for pump pressure and filling volume Backlit indicator Filling volume expansion vessel liters 1.6+0.9 Dimensions Control unit B x T x H 25 x 25 x 18
JULABO High Temperature Circulators can be used for temperature applications up to +400 °C. The units provide powerful heating capacities for shortest heat-up times and rapid compensation of exothermic and endothermic reactions. The closed construction prevents oil fumes even at high temperatures. The units provide automatic heat-up and cracking protection to ensure long life-time of the bath fluid. The filling system automatically purges the fluid system of air. Units with model designation ‚C.U.‘ are equipped with a powerful cooling unit for tap water connection. This allows for temperature applications already at +20 °C and for rapid cooling. Typical applications: Reactors, autoclaves, distillation columns, miniplant installations, pilot plants and production facilities.
21 products found
Sort by:
Recommended
