Patented operating principle
The VISCO JET® stirring system works on the basis of the so-called cone principle. The dynamic pressure at the displacer inlet and an accelerated flow inside the displacer generate turbulence (so-called nozzle effect). These turbulences collide during the circular movement of the stirring tool and lead to the revolutionary stirring movement. The cone pieces were built in a sophisticated angular ratio, so that they complement each other optimally in terms of flow behavior and thus an additional stirring effect is achieved.
The VISCO JET® 60 is ideal for vessels with the following characteristics:
The VISCO JET® 60 is made of stainless steel |
The VISCO JET® 80 is ideal for vessels with the following characteristics:
The VISCO JET® 80 is made of stainless steel |
The VISCO JET® 120 is ideal for vessels with the following characteristics:
The VISCO JET® 120 is made of stainless steel. |
The VISCO JET® Crack 80 is ideal for vessels with the following characteristics:
The VISCO JET® Crack 80 is made of stainless steel |
The VISCO JET® Crack 120 is ideal for vessels with the following characteristics:
The VISCO JET® Crack 120 is made of stainless steel |
-
ManufacturerHeidolph Instruments GmbH
-
Country of OriginGermany
-
Blade Size (mm)80, 60, 120
-
For Vessel Diameter (mm)115-200, 80-150, 170-300
-
Length (mm)500
-
MaterialStainless Steel V4A, Impeller: Plastic (POM) Hub: Brass Shaft: Polyamide-Coated
-
Rotation Speed Range (rpm)200 - 700, 200 - 800, 120 - 500
-
Shaft Diameter (mm)10
-
ModelVISCO JET® - 60 mm, VISCO JET® - 80 mm, VISCO JET® - 120 mm, VISCO JET® CRACK - 80 mm, VISCO JET® CRACK - 120 mm, VISCO JET® - 80 mm (POM), VISCO JET® - 120 mm (POM)