United States en
  • Ovens
  • Carbolite PF030-230SN Fan Assisted Convection Laboratory Oven PF30, 300°C Max Temperature, 28 Litres Capacity, 220 - 240 V Single Phase
Carbolite PF030-230SN Fan Assisted Convection Laboratory Oven PF30, 300°C Max Temperature, 28 Litres Capacity, 220 - 240 V Single Phase
ZoomCreated with Sketch.

Carbolite PF030-230SN Fan Assisted Convection Laboratory Oven PF30, 300°C Max Temperature, 28 Litres Capacity, 220 - 240 V Single Phase

Not rated yet
0
Carbolite Gero Limited

PF30

Max temp (°C) 300
Min temp (°C) Ambient +30
Volume (litres) 28

 

Temp stability (°C) ±0.2
Temp uniformity (°C) ±5.0 @ 300°C
Heat-up time (mins) 40
Recovery time (mins) 4
Dimensions:
Internal H x W x D (mm)		 300 x 290 x 320
Dimensions:
External H x W x D (mm)		 470 x 665 x 470
Shelves fitted / accepted 2 / 3
Shelf loading each / total (kg) 10 / 20
Optional heavy duty reinforced base max. weight (kg) 40
Optional heavy duty shelves max. quantity 2
Optional heavy duty shelves max. weight / shelf (kg) 20
Configuration Bench-top
Air changes / hr 50 / 360*
Max power (W) 1000
Holding power (W) 560
Weight (kg) 37
  • £1835.00
Qty:  

Laboratory ovens of the Peak series 300°C are available as both PF fan convection and PN natural convection models.

Fan convection provides greater temperature uniformity and faster recovery rates than natural convection.

Standard features

  • 300°C maximum operating temperature
  • 28 to 230 litre chamber volumes
  • Equipped with the R38 digital PID temperature controller
  • Fan convection for rapid heating & recovery & excellent uniformity
  • Chemically resistant stainless steel liner
  • Two nickel-chrome plated wire shelves
  • Lever latch door & airtight silicone seal
  • Compliant with safety standard BS EN 61010-2-010:2003 

Options (specify these at time of order)

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
  • Access port for independent thermocouple
  • Accessory shelves & runners
  • Cable entry ports
  • Variable speed fan control
  • Stoving & curing options for extraction of small volumes of volatile solvents (not compatible with viewing window option)
  • Viewing window (not compatible with stoving & curing option)
  • Interior light (not compatible with stoving & curing option)
  • Air exhaust fan
  • Moisture extraction option (comprising sealed seams and air exhaust fan)
  • Stacking frame to enable units to be stacked one upon another
  • Lockable door
  • Door switch to isolate elements and fan
  • Fixed or castor mounted floor stands
  • Low voltage options for use below 220 V
  • Routine spares kit

 

    • SKU
      PF030-230SN
  • Temperature Range
    300
  • Volume (litres)
    28
  • Dimensions: External H x W x D (mm)
    470 x 665 x 470
  • Max power (W)
    1000
  • Air Circulation
    Fan Assisted Convection
  • Manufacturer
    Carbolite Gero Limited





The R38 Basic PID Set-point Controller is used in the Apex Ovens together with a thermocouple sensor.

Standard features

  • A simple easy to use controller that is fitted to the Apex ovens
  • Providing accurate PID (proportional integral derivative) control
  • Panel mounted device with a clear red LED display

Options (specify these at time of order)

  • Optional over-temperature protection is available by the addition of an additional through the panel temperature control instrument
  • Optional hydraulic thermostat for low cost over-temperature protection


R38 Controller

Control technologyDigital PID
Display H x W (mm)Red LED numerical 20 x 50
ConfigurationPanel mounted
Dimensions H x W (mm)35 x 78


Recommended Accessories