-
WTW 301720 LR 925/01Stainless Steel Two Electrode Measuring Cell
LR 925/012-electrode-IDS conductivity electrode with stainless steel electrodes, cell constant 0.1 1/cm, - automatic recognotion - memory for 10 calibration records - fail safe signal transfer - measuring range 0,01 µS/cm to 200 µS/cm - integrated temperature
Technical Data
TetraCon® 925 LR 925/01 Conductivity 10 µS/cm … 2000 mS/cm
±0.5 % of value0.01 ... 200 µS/cm
±0.5 % of valueSpec. resistance 0.5 Ohm cm ...100 kOhm cm
±0.5 % of value5 kΩ ... 100 MΩ
±0.5 % of valueSalinity 0.0 ... 70,0
± 0.5 % of value— TDS 0 ... 1999 mg/l, 0.0 ... 199.9 g/l
±0.5 % of value— Temperature 0 ... 100.0 °C
±0.2 °C0 ... 100.0 °C
±0.2 °CIDS conductivity measuring cells – measurements from pure water all the way to concentrated solutions with proven two and four electrode technology
- Proven 2 and 4 electrode technology
- Easiest handling, robust design
- Wide area of application - from pure water to highly concentrated solutions
-
WTW 301711 TetraCon® 925-3 Graphite four electrode measuring cell, 3m fixed cable
4-electrode-IDS conductivity electrode with graphite electrodes, epoxy shaft, cell constant 0.475 1/cm, pressure resistant up to 6 bars - automatic recognotion - memory for 10 calibration records - fail safe signal transfer - measuring range 10 µS/cm to 2
Technical Data
TetraCon® 925 LR 925/01 Conductivity 10 µS/cm … 2000 mS/cm
±0.5 % of value0.01 ... 200 µS/cm
±0.5 % of valueSpec. resistance 0.5 Ohm cm ...100 kOhm cm
±0.5 % of value5 kΩ ... 100 MΩ
±0.5 % of valueSalinity 0.0 ... 70,0
± 0.5 % of value— TDS 0 ... 1999 mg/l, 0.0 ... 199.9 g/l
±0.5 % of value— Temperature 0 ... 100.0 °C
±0.2 °C0 ... 100.0 °C
±0.2 °CIDS conductivity measuring cells – measurements from pure water all the way to concentrated solutions with proven two and four electrode technology
- Proven 2 and 4 electrode technology
- Easiest handling, robust design
- Wide area of application - from pure water to highly concentrated solutions
-
WTW 301710 TetraCon® 925 Graphite four electrode measuring cell, with epoxy shaft, cell constant 0.475/cm, with 1.5 m fixed cable with waterproof digital connector
Technical Data
TetraCon® 925 LR 925/01 Conductivity 10 µS/cm … 2000 mS/cm
±0.5 % of value0.01 ... 200 µS/cm
±0.5 % of valueSpec. resistance 0.5 Ohm cm ...100 kOhm cm
±0.5 % of value5 kΩ ... 100 MΩ
±0.5 % of valueSalinity 0.0 ... 70,0
± 0.5 % of value— TDS 0 ... 1999 mg/l, 0.0 ... 199.9 g/l
±0.5 % of value— Temperature 0 ... 100.0 °C
±0.2 °C0 ... 100.0 °C
±0.2 °CIDS conductivity measuring cells – measurements from pure water all the way to concentrated solutions with proven two and four electrode technology
- Proven 2 and 4 electrode technology
- Easiest handling, robust design
- Wide area of application - from pure water to highly concentrated solutions
Full Description
TetraCon 925 electrode-IDS conductivity cell with graphite electrodes, epoxy shaft, cell constant 0.475/cm, with 1.5 m fixed cable with waterproof digital connector, automatic recognition, memory for 10 calibration records, fail safe signal transfer, measuring range 10 µS/cm to 2000 mS/cm, integrated temperature sensor
-
WTW 301721 TetraCon® 925/C Graphite four electrode measuring cell with head made of PEEK, with 1.5 m fixed cable with waterproof digital connector for MultiLine®, MonoLine or inoLab® IDS
Technical Data
TetraCon® 925 LR 925/01 Conductivity 10 µS/cm … 2000 mS/cm
±0.5 % of value0.01 ... 200 µS/cm
±0.5 % of valueSpec. resistance 0.5 Ohm cm ...100 kOhm cm
±0.5 % of value5 kΩ ... 100 MΩ
±0.5 % of valueSalinity 0.0 ... 70,0
± 0.5 % of value— TDS 0 ... 1999 mg/l, 0.0 ... 199.9 g/l
±0.5 % of value— Temperature 0 ... 100.0 °C
±0.2 °C0 ... 100.0 °C
±0.2 °CIDS conductivity measuring cells – measurements from pure water all the way to concentrated solutions with proven two and four electrode technology
- Proven 2 and 4 electrode technology
- Easiest handling, robust design
- Wide area of application - from pure water to highly concentrated solutions
Full Description
TetraCon 925/C4-electrode-IDS conductivity cell with graphite electrodes, epoxy shaft, PEEK head for use in acid contaminated environments, cell constant 0.475 cm–1, with 1.5 m fixed cable with waterproof digital connector for MultiLine®, MonoLine or inoLab® IDS.
-
WTW 301718 TetraCon® 925/LV Graphite four electrode cell for small volumes and viscous samples with graphite electrodes, epoxy shaft, cell constant 0.469/cm, 1.5 m fixed cable with waterproof digital connector
Technical Data
TetraCon® 925 LR 925/01 Conductivity 10 µS/cm … 2000 mS/cm
±0.5 % of value0.01 ... 200 µS/cm
±0.5 % of valueSpec. resistance 0.5 Ohm cm ...100 kOhm cm
±0.5 % of value5 kΩ ... 100 MΩ
±0.5 % of valueSalinity 0.0 ... 70,0
± 0.5 % of value— TDS 0 ... 1999 mg/l, 0.0 ... 199.9 g/l
±0.5 % of value— Temperature 0 ... 100.0 °C
±0.2 °C0 ... 100.0 °C
±0.2 °CIDS conductivity measuring cells – measurements from pure water all the way to concentrated solutions with proven two and four electrode technology
- Proven 2 and 4 electrode technology
- Easiest handling, robust design
- Wide area of application - from pure water to highly concentrated solutions
Full Description
TetraCon® 925/LV4-electrode-IDS conductivity cell with fork design for measurement of small volumes (about 2.5 mL) and viscous samples, with graphite electrodes, epoxy shaft, cell constant 0.469/cm, 1.5 m fixed cable with waterproof digital connector.
-
WTW 301716 TetraCon 925-P IDS Digital Conductivity Cells
Conductivity 10 µS/cm … 2000 mS/cm
±0.5 % of valueSpec. resistance 0.5 Ohm cm ...100 kOhm cm
±0.5 % of valueSalinity 0.0 ... 70,0
± 0.5 % of valueTDS 0 ... 1999 mg/l, 0.0 ... 199.9 g/l
±0.5 % of valueTemperature 0 ... 100.0 °C
±0.2 °C -
WTW 1FD35C inoLab Multi 9310 SET C Multi Parameter Benchtop Meter for pH, ORP, Dissolved Oxygen and Conductivity
Specifications
Measuring channel 1 (universal) Parameter pH, ORP, dissolved oxygen, conductivity Measuring range Depends on the IDS sensor used Display LCD graphic, backlit CMC/QSC Yes/Yes Data memory manual 500/4500 automatic Logger manual/timer-controlled Interface Mini USB-B Printer (optional) Thermal printer, width 58 mm Power supply Universal power supply, 100 to 240 V, 50/60 Hz, 4 x 1.5 V AA or 4 x 1.2 V NiMH batteries -
WTW 903858 AS/IDS-60 Cables for IDS Sensors with Plug Head
Model
LRD 01
LRD 325
LR 325/01
LR 325/001
TetraCon® 325
TetraCon® DU/T
Order No.
302220, 302222
302225, 302229
301961
301962
301960, 301970, 301971
301252
Measuring principle
2 electrodes measuring cell
4 electrodes measuring cell
2 electrodes measuring cell
4 electrodes measuring cell
Measuring Range
0.001 µS/cm ... 200 µS/cm
1 µS/cm ...
2 S/cm0.001 µS/cm ... 200 µS/cm
0.0001 µS/cm ... 30 µS/cm
1 µS/cm ...
2 S/cmCell constant
0.1 cm-1, ±2%
0.475 cm-1, ±1.5%
K = 0.1 cm-1
K = 0.01 cm-1
K = 0.475 cm-1
K = 0.778 cm-1
Resolution
Depends on measuring range
Temperature sensor
Integrated NTC
Temperature Measurement
0 °C ... +130 °C
0 °C ... +100 °C
-5 °C ... 80 °C
0 °C ... 60 °C
Maximum pressure
14 bar (at 20 °C)
10 bar (at 20 °C)
2 bar
Electrical Connection
Integrated PU connection cable with 7-pole screw plug (IP 65)
Integrated cable mit 8-pole plug
8-pole socket for cable KKDU 325
Mechanical
Shaft
Stainless steel 1.4571
Epoxy
POM
Kable gland
Brass, nickel-plated
—
—
—
—
Connection head
—
—
POM
—
Electrodes
Stainless steel 1.4571
Graphite
Stainless steel 1.4571
Graphite
Protection Rating
IP65
IP68
(Sensor and cable)IP65
(when connected)(when connected)
(Measuring cell until immersion length)
Weight (without cable)
Approx. 350 g
Approx. 300 g
Approx. 135 g
Approx. 280 g
Approx. 135 g
Approx. 170 g
Warranty
2 years on defects in quality according to § 10 terms of conditions
-
WTW 1FD57K Multi-Parameter Benchtop Meter inoLab® Multi 9630 IDS SET K in set with IDS sensors: digital IDS pH electrode SenTix® 980, buffer 4, 7 and 10.01, 3 mol/l KCl, optical IDS D.O. sensor FDO 925, digital IDS cond cell TetraCon® 925, 0.01 mol/l KCl
Technical Data
Parameter pH, mV, ISE, saturation, concentration, partial pressure, conductivity, spec. resistance, salinity, TDS, temperature Universal measuring channels 3 Measuring range Depends on the IDS sensor used Display LCD color graphic CMC/QSC Yes/Yes Data memory manual 500/10000 automatic Analog pH/ORP/ISE sensors ADA 94 pH/IDS DIN or ADA 94 pH/IDS BNC Logger manual/timer-controlled Interface USB A/Mini USB-B Printer Three preinstalled drivers (description see Operating Instructions) Power supply Universal power supply 100 to 240 V, 50/60 Hz Digital high performance multi-parameter device with three inputs for pH, ISE, conductivity and dissolved oxygen and comprehensive GLP functions
- Wireless ready
- Simultaneous measurement with three independent measuring channels
- Fatigue proof reading on brilliant color display
Full Description
Inolab Multi 9630 IDS SET K- Wirelesss ready professional digital multi-parameter benchtop meter for IDS sensors, for measurements/documentation according GLP/AQA. With three universal inputs for pH/mV/ISE, dissolved oxygen and conductivity. Meter including universal power supply, stand, operation manual, software and USB cable plus probes optical dissolved oxygen (FDO 925), 4-electrode conductivity cell (TetraCon 925) and pH electrode (SenTix 980)
-
WTW 2FD353 Multi 3510 IDS SET 3 Multi-Parameter Portable Meter
Measuring range Measuring range of the IDS sensor Display LCD graphic, backlit Memory manual 500 / 4500 automatic Measurement channel 1 Protection class IP 67 Power supply 4 x 1,5 V AA (supplied) 4x 1,2 V NiMH-Akku or via USB port -
WTW 2FD350 Multi 3510 IDS Multi-Parameter Portable Meter MultiLine
Measuring range Measuring range of the IDS sensor Display LCD graphic, backlit Memory manual 500 / 4500 automatic Measurement channel 1 Protection class IP 67 Power supply 4 x 1,5 V AA (supplied) 4x 1,2 V NiMH-Akku or via USB port -
WTW 2EA312 Multi 3510 IDS SET 4 Multi-Parameter Portable Meter MultiLine
Measuring range Measuring range of the IDS sensor Display LCD graphic, backlit Memory manual 500 / 4500 automatic Measurement channel 1 Protection class IP 67 Power supply 4 x 1,5 V AA (supplied) 4x 1,2 V NiMH-Akku or via USB port -
WTW 2FD351 Multi 3510 IDS SET 1 Multi-Parameter Portable Meter MultiLine
Measuring range Measuring range of the IDS sensor Display LCD graphic, backlit Memory manual 500 / 4500 automatic Measurement channel 1 Protection class IP 67 Power supply 4 x 1,5 V AA (supplied) 4x 1,2 V NiMH-Akku or via USB port -
WTW 2FD35U Multi 3510 IDS SET KS1 Multi-Parameter Portable Meter MultiLine
Measuring range Measuring range of the IDS sensor Display LCD graphic, backlit Memory manual 500 / 4500 automatic Measurement channel 1 Protection class IP 67 Power supply 4 x 1,5 V AA (supplied) 4x 1,2 V NiMH-Akku or via USB port -
WTW 2FD57F Multi-Parameter Portable Meter MultiLine® Multi 3630 IDS SET F contains SenTix® 940, FDO® 925, TetraCon® 925
Measure three parameters simultaneously – pH, ORP, dissolved oxygen, conductivity and/or turbidity with the digital pocket meter Multi 3630 IDS
- Wireless ready
- Measure, display and document three parameters plus secondary information
- Digital sensor detection
- Three galvanically isolated sensor inputs
Technical DataMeasuring ranges Depending on the respective IDS sensor Display LCD color graphic, backlit Data memory manual 500 / 10000 automatic Measuring channels 3 Protection class IP 67 Interfaces Mini-USB-B, USB-A Power supply Wide range power supply, 4x 1.2 V NiMH battery or via Mini USB-B Full Description
Multi 3630 IDS SET F- Professional wireless ready digital multi meter for portable field measurements, with three channel input, colour graphic display inc datalogger and USB interfaces. Single instrument in case with buffer 4 and 7, 3 mol/l KCL conductivity standard, short instruction manual, CD-ROM, rechargeable batteries driver software for USB, cable and universal power supply. Set includes meter in field case with IDS sensors: digital pH electrodes SenTix 940, digital conductivity cell TetraCon 925, optical DO probe FDO 925 and QSC Kit
17 products found
Sort by:
Recommended