Mettler Toledo 30253098 pH electrode InLab Water Go combination pH electrode with a plastic shaft, ring junction and S7 screw head
Specifications - pH electrode InLab Water Go
Measuring range | pH 1 – 11 |
Temperature Range | 0 °C – 80 °C |
Connector | BNC/RCA (Cinch) IP67 |
Type of junction | Porous PTFE |
Shaft Material | PSU |
Sensor Type | Combined electrode |
Shaft length | 120 mm |
Shaft Diameter | 12 mm |
Cable (Length) | 1.8 m |
Parameter | pH |
Reference System | ARGENTHAL™ with Ag+-trap |
Reference electrolyte | 3 mol/L KCl |
Membrane glass | LoT |
Membrane resistance (25°C) | < 150 MΩ |
ISM | No |
Temperature probe | NTC 30 kΩ |
For portable meter | Yes |
Maintenace-free | No |
Signal type | Analog |
Sample | Low-ion strength (pure water) water |
Reference electrolyte Order no. | 51343180 |
pH electrode InLab Water Go
Origin of Precision.A combination pH electrode with a plastic shaft, ring junction and S7 screw head. Designed for soft water like surface water or drinking water.
Stable reading in ion-poor samples
High electrolyte outflow reduces the potential at the junction, which in turn supports more stable readings.
IP67 - For a water-proof measurement
Ensures your entire portable measuring system (Seven2Go meter and InLab sensor) is able to withstand wet and demanding environments.
Spill free wetting cap
Easy-to-use wetting cap with a self-tightening screw lock that guarantees clean and secure electrode storage.