Specifications
Model | R 301 Stirring Shaft Protection | R 301.1 Support Holder | R 303 Stirring Shaft Protection | SI 400 Safety Switch | SI 472 Fixing Device | SI 474 Fixing Device |
Weight | 0.204 kg | 0.3246 kg | 0.1917 kg | 0.2185 kg | 1.5488 kg | 0.5961 kg |
Permissible ambient temperature | 5 - 40 °C | 5 - 40 °C | 5 - 40 °C | 5 - 40 °C | 5 - 40 °C | 5 - 40 °C |
Prevents potential injuries at the rotating shafts and stirring elements. It can be directly attached to the stirring motors RW 20 digital, RW 28 digital and the EUROSTAR series overhead stirrer. R 301.1 support holder is required to fix the R 301 stirring shaft protection when use with NANOSTAR 7.5 digital, MINISTAR, MICROSTAR series and Eurostar 400 overhead stirrer. Length adjustment: 190 - 310 mm Material: plexiglass |
For fixing the stirring shaft protection R 301 to the stand when use with overhead stirrers NANOSTAR 7.5 digital, MINISTAR, MICROSTAR series and Eurostar 400. Length: 310 mm Material: stainless steel |
Prevents potential injuries due to the rotating shafts and stirring elements. Can be directly attached to the stirrer RW 47 digital. Material: Macrolone |
The SI 400 consists of an end switch (normally closed contact / switch) and a magnetic switch contact (actuator) which is mounted on the floor stand R 472 with the fixing device SI 472 and on the telescopic stand R 474 with the fixing device SI 474. The stirring unit RW 47 digital can only be switched on through the SI 400, when the agitator is adjusted in the mixing vessel to the user designated height. The power of the RW 47 automatically shuts off if the stirring unit is lifted off the designated height. Also suitable for dispersing instrument T 65 basic/digital ULTRA-TURRAX®. Dimensions end switch (B x T x H): 84 x 19 x 16 mm Dimensions switch contact (B x T x H): 73 x 10 x 19 mm Contact: 1 normally closed contact Casing material: plastic (ABS) Protection class according to DIN EN 60529: IP 67 Operating temperature: - 10 - 65 °C Voltage / current: max. 250 VAC / 2A |
To attach the safety switch SI 400 to the floor stand R 472. | To attach the safety switch SI 400 to the telescopic stand R 474 and R 653. |
-
ManufacturerIKA-Werke GmbH & Co. KG
-
Country of OriginGermany
-
ModelR 301, R 301.1, R 303, SI 400, SI 472, SI 474, WH 11, FK 1, R 60, R 60.1
-
TypeStirring Shaft Protection, Support Holder for R 301, Safety Switch, Fixing Device for SI 400 to R 472 Stand, Fixing Device for SI 400 to R 474 or T 653 Stand, Wall mount for WICO, Flexible coupling, Keyless chuck, clamping range 0.5 - 10 mm, Keyless chuck, clamping range 0.5 - 8 mm