DC1-300 immersion cooler constantly extracts heat with the stirrer or circulator controlling the actual temperature of the bath liquid. The unit consists of a stainless-steel immersion coil (65mm diameter) on a 900mm flexible stainless steel pipe with a protective outer shield which is connected to the refrigeration unit. 

With NE4 series of digital stirred baths; the cooling coil is placed at the rear of the thermostirrer and does not impact on the useable area of the bath thus maintaining maximum working space. The immersion cooler designed to cool liquids 20°C or below.  The outer casing of the refrigeration unit has an anti-bacterial painted finish. It is recommended that accessory lid or spheres are used on the bath to maximise efficiency. Time taken to cool glycol / water mix from 20°C to -20°C based on NE4-8D and NE4-28D Bath:

• 20% water 80% glycol: -20°C to 20°C
• Lab Bath 4590: -15°C to 20°C

Notes 

• Normal operating performance is within an ambient temperature range of 10°C to 20°C. Where ambient temperature range exceeds 20°C this degrades cooling performance.
• For optimum cooling performance use within a minimum distance of 40cm of free air around the ventilation slots.
• To achieve optimum performance with any stirred or circulating bath use a lid or BP0368 Polypropylene spheres at all times. This can reduce up to 70% of ambient room temperature being transferred into the bath being cooled. Doubling this layer of polypropylene spheres or using a lid in conjunction with spheres can reduce heat transfer by up to 90%.
• The immersion cooler is not suitable for use with unstirred water baths.
• Keep out of direct sunlight, away from high ambient temperatures or direct heat sources.Do not place it where there are corrosive fumes, excessive moisture or excessively dusty areas.

The DCI-300 Series is made here in Great Britain with the highest quality of materials.
The DCI-300 Series is made here in Great Britain with the highest quality of materials.