Stainless steel round boiling baths. 1026ER regulates from a gentle simmer to a vigorous boil, whereas the 1026E continuously boils. Both fitted with a sheathed immersion heater and constant water level device, with resettable thermal cut out for low water level condition. Supplied with a set of rings to vary the aperture diameter accommodating different sizes of vessels such as evaporating dishes, glassware and round bottom flasks heated by steam. 

The steam produced provides an effective source of heat for samples:

• That may be otherwise thermally damaged by a naked flame.
• Used for applications to distil/concentrate liquids, melt agar and other solids.
• Metallurgical analysis, protein analysis and bacteriological examinations.

Warranty

2 year warranty as standard and we also offer free advice and support for our baths. 

Technical Specifications

Concentric Rings By removing concentric rings, the hole sizes can be varied to accommodate different sizes of vessels. Center ring - removed, aperture 30mm diameter hole  Ring 1 - removed, aperture 42mm diameter hole Ring 2 - removed, aperture 58mm diameter hole Ring 3 - removed, aperture 78mm hole Ring 4 - removed, aperture 103mm hole Ring 5 - removed, aperture 128mm hole Ring 6 - removed, aperture 153mm hole

Features and Benefits 

Clifton sonicating water baths are designed with high power piezoelectric transducers ensuring maximum ultrasonic power throughout working area	Easy to clean tank
Supplied with comprehensive operating instructions and two year warranty.	Concealed heater and temperature sensors.
Each bath is uniquely identified with its own serial number recorded on our product database. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.	A 304 spec stainless steel tank gives good resistance to many substances and a clean appearance throughout its working life.

Heating Information

1026ER
This model regulates water from gentle simmer to vigorous boil. Always place the boiling bath on a heat proof surface. Heater indication lamp.

1026E
The bath provides constant boiling water for gentle heating of samples by steam. Always place the boiling bath on a heat proof surface. Power on indicator.