LTE’s large capacity Swallow incubators offer precise control and are designed to meet the ever increasing demands of the modern laboratory and process facility.

Using the latest in microprocessor technology our Swallow laboratory incubators are simple to operate and are controlled by means of a microprocessor system with digital displays of temperature and process time, offering precise temperature control, fast heat-up times and almost undetectable overshoot.

All models allow any temperature within the range to be selected, process times and delayed starts can also be programmed if needed. In addition the processor allows up to three time/temperature profiles to be programmed within one cycle, where combinations of time and temperature are required.

All Swallow models have stainless steel work chambers with fan circulated heat and meet fully with the requirements of IEC 1010-2-010 Class 2.

Capacities: 480, 750 and 1000 Litres
Temperatures:  5°C above ambient to 100°C

Swallow large capacity incubators offer precise control and are designed to meet the ever increasing demands of the modern laboratory and process facility.

• Using the latest in microprocessor technology these products are simple to operate and are controlled by means of a microprocessor system, offering precise temperature control, fast heat-up times and almost undetectable overshoot.
• The process timers and delayed start timers are each programmable from 1 minute to 99 hours 59 minutes.
• All models allow up to 3 time/temperature profiles to be programmed within one cycle.
• An RS232 communication port can be added to transfer information to an intelligent receiver.
• Swallow incubators meet fully with the requirements of IEC 1010-2-010 Class 2.

	The microprocessor control system allows users to accurately control the temperature via the touchpad located beneath the digital display which displays the set and current temperatures.
As an extra safety measure the unit has a built in over-temperature safety cut-out, to utilise this the user will designate a safe temperature point via the control panel, if the machine then exceeds this temperature the machine will cut-out and alert the user.
	Fan circulation of the heat generated by the heater ensures a constant steady temperature in all areas of the cabinet, also helps heat the cabinet faster than by conventional convection heating.