Hermle Z 36HK Table Top High Speed Centrifuge
 |
 |
The Z 36 HK is the culmination of many years of centrifuge design experience combined with the latest technology. In this centrifuge are high speeds and centrifugal acceleration possible as well as large voluminas and a huge variety of tubes.The Z 36 HK is the most capable centrifuge in this class.
Technical Specifications
| Maximum Speed: | 30 000 rpm |
|---|---|
| Maximum RCF: | 65 395 xg |
| Maximum Volume: | 6 x 250 ml |
| Speed Range : | 200 - 30,000 rpm |
| Running Time : | 59 min 50 s / 10 s increments 99 h 59 min / 1 min increments |
| Dimensions (WxHxD): | 71.5 cm x 42 cm x 51 cm |
| Weight: | 91 kg |
Specifications
- Maintenance-free induction drive
- Microprocessor with large LCD display
- Motor driven lid lock
- Automatic radio-frequency rotor identi cation system (RFID) with over speed protection, immediately upon rotor insertion
- Active imbalance-identication and cut off (rotor specific)
- CFC-free refrigeration system
- A large variety of rotors and accessories
- Audible signal at the end of each run with several melody options
- Noise level under 65 dBA at max. speed
- Manufactured according to international safety regulations, i.e. IEC 61010
- Imbalance tolerant drive pin
- Standstill cooling
- Stainless steel chamber
Distinct Control Panel
- Simple one handed operation
- Easy to program with gloves on
- Splash proof digital display
- Permanent indication of Preset and Actual Values
- Selection of speed in both rpm and g-force, with increments of 10
- 10 acceleration and 10 deceleration rates with storage of up to 99 runs
- Preselection of the temperature from - 20°C to 40°C with 1°C increments
- Temperature selection available in both °C or °F
- Pre-cooling program option
- Standstill cooling
- Pre-selection of running time from 10 s to 99 h 59 min or continous
- Storage of up to 99 runs incl. rotor type
- Quick-key for short runs
- Diagnostic program
- Timer: the centrifuge starts at the preselected time
