The Cole-Parmer® Stuart™ INC-200 & INC-200D Incubators are suitable for multiple applications such as plant propagation, humidity testing, climactic condition simulation, corrosion testing and more.
Forced air circulation and electronic control ensures accurate temperature conditions. A pre-set push switch automatically sets the temperature at 37ºC, while a safety feature cuts off heating if the unit reaches 72ºC or higher.
Temperature is set via a calibrated knob for the analogue model (INC-200), and via an LCD display when using the digital model (INC-200D). The latter not only allows more accurate temperature management but also gives a constant reading of actual temperature when in use.
The purpose-built design offers easy access to samples - a hinged front door panel and plugged holes (2 x 10mm diameter) on each of the side panels for the introduction of gases or cables. The clear acrylic® polymer construction also allows total sample visibility at all times.
Technical Specifications
Specification |
INC-200/INC-200D |
Temperature range |
Ambient +5oC to 60oC |
Temperature fluctuation at 37oC |
±0.1oC |
Temp. variation between shelves |
±0.3oC |
Nominal volume |
60 litres |
Internal dimensions, mm (w x d x h) |
450 x 380 x 380 |
Overall dimensions, mm (w x d x h) |
600 x 390 x 390 |
Net weight, kg |
11.2 |
Electrical supply |
230V, 50Hz, 350W |
IP Rating |
30 |