Nom. speed 60HZ : 2.361 × 10⁻⁴ m³/s
Power total : 90.00 W
Nom. speed : 2.083 × 10⁻⁴ m³/s
Ult. Pressure : 0.300 Pa
Nom. speed 50HZ : 2.083 × 10⁻⁴ m³/sSmall
EM series pumps are rugged mechanical oil-sealed pumps with speeds of 0.7 and 1.5 m3
/hr. Compact and quiet, they feature advanced lubrication circuits, high reliability, and accessories to suit specific application needs.
Features and Benefits
Pumping speeds of either 0.7 to 1.5 m3h‑1.
Industry proven long term reliable performance.
Free standing, compact design providing flexibility of use.
Alternate side inlet connection port so that overall installation height can be reduced to minimum when required.
Low noise, with the E2M0.7 at just 43 dB(A).
Low energy consumption, with the E2M0.7 at 0.09 kW.
O ring sealed sight glass allows visual inspection of oil level and condition.
Gas ballast valve for large water vapour handling capacity.
Simple installation and operation with no customer wiring.
Forced air cooling ensures low pump surface temperature.
Internal ATEX classification of Ex II 3 G c IIB T4.
Approved EN61010, CSA22.2 and UL61010.
E2M0.7 and E2M1.5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size. Providing long term reliability, these pumps have become the industry standard in range of scientific and laboratory applications, and the ideal partner for your tubomolecular pump.
The drive is provided through and Oldham coupling by a single phase motor. The motor is totally enclosed and cooled by the motor-cooling fan which directs the air along the motor fins. A thermal overload devise is fitted to the motor which switches off the pump if the motor gets too hot, this will automatically reset when the motor cools down and restarts the pump.
This is a two stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.