Medium EM series pumps are rugged mechanical oil-sealed pumps with speeds of 18and 28 m3/hr. Compact and quiet, they feature advanced lubrication circuits, high reliability, and accessories to suit specific application needs.
The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a singlephase or threephase (four pole) air cooled motor
Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.
Features and Benefits
The pump is designed for reliable, long‑term operation.
Thermal overload device prevents overheating (single phase only).
The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor cooling fan.
Full height O ring sealed oil sight glass for easy checking of oil level and condition.
Large sight glass and operating oil range.
IE3 energy efficient 3 phase motor used with E2M28.
Technology
This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
Applications
- Analytical instruments
- Leak detectors, Helium
- Research and development
- Backing Turbomolecular pumps
General Product Information
Connection Vacuum Inlet Flange |
DN 25 ISO-KF (NW25) |
Noise Level |
57.00 db(A) |
Supply Frequency |
50 Hz 60 Hz
|
Weight |
37.00 |
Power Supply Phase |
1-Ph |
Supply Voltage |
1Ph 115/230V 50/60Hz |
IP Rating |
IP44 |
Operation Conditions - Limitations
Oil Capacity Max. |
1.400 × 10⁻³ |
Pressure Outlet Continous Max. |
1.500 × 10⁵ |
Oil Capacity Min. |
9.000 × 10⁻⁴ |
Performance Data
Power Total Rated @60Hz |
750.00 |
Pumping Speed @60Hz |
5.666 × 10⁻³ |
Pressure Ultimate |
3.00 |
Power Total Rated @50Hz |
550.00 |
Pumping Speed @50Hz |
4.722 × 10⁻³ |
Rotational Speed @60Hz Nominal |
28.66 |
Rotational Speed @50Hz Nominal |
24.00 |
Pressure Water Vapour Max. |
5000.00 |
pressureUltimateWithGasBallast |
65.00 |
Max. Displacement @50Hz |
5.694 × 10⁻³ |
Max. Displacement @60Hz |
6.944 × 10⁻³ |
Environmental Conditions
Temperature Ambient Operation Min. |
13.00 |
Classification
Product Pressure Range |
Medium Vacuum - 1 mbar - 1*10-3 mbar |
High / Medium / Rough Vacuum Classification |
Medium Rough Vacuum Pump |
Dry or Wet Pump |
Wet pump |
Vacuum Pump Technology |
Oil Rotary Vane Pumps Single-Stage |
Variants
Variant Oil Type |
Standard pump for use with Ultragrade oil |