IKA's ULTRA-TURRAX - the epitome of first-rate dispersing devices. Whether used for homogenizing, emulsifying or suspending - IKA's dispersers enable the best possible results. The digital display allows you to keep track of the speed range up to 24,000 revolutions per minute, starting softly of course. Due to their broad spectrum of dispersing tools, IKA homogenizers are highly effective for a variety uses. Common disperser uses include: homogenization of effluent samples, dispersing tasks under vacuum pressure, and PCR analysis. IKA dispersers know no limits when it comes to professional particle reduction. Functionality, safety, and longevity are the main goals in the development of IKA dispersers.
Specifications
Model | T 50 digital ULTRA-TURRAX® | T 65 basic ULTRA-TURRAX® | T 65 digital ULTRA-TURRAX® |
Ident Number | 0003787002 | 0004023500 | 0004234500 |
Motor rating input | 1100 W | 1800 W | 2600 W |
Motor rating output | 700 W | 1500 W | 2200 W |
Volume range min. (H2O) | 0.25 l | 2 l | 2 l |
Volume range max. (H2O) | 30 l | 50 l | 50 l |
Viscosity max. | 5000 mPas | 5000 mPas | 5000 mPas |
Speed min. | 600 rpm | 1000 rpm | |
Speed max. | 10000 rpm | 7200 rpm | 9500 rpm |
Speed deviation | 1 % | 3 % | |
Speed display | LED | 7 segment LED | |
Speed adjustment | stepless | stepless | |
Noise without element | 72 dB(A) | 75 dB(A) | 75 dB(A) |
Extension arm diameter | 16 mm | ||
Extension arm length | 220 mm | ||
Process type | batch | batch | batch |
Permissible ON time | 100 % | ||
Width | 115 mm | 185 mm | 300 mm |
Depth | 139 mm | 400 mm | 400 mm |
Height | 355 mm | 450 mm | 420 mm |
Weight | 5.85 kg | 26 kg | 35 kg |
Permissible ambient temperature min. | 5 °C | 5 °C | 5 °C |
Permissible ambient temperature max. | 40 °C | 40 °C | 40 °C |
Permissible relative humidity | 80 % | ||
Permissible ambient conditions | 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) | 80 % | |
Protection class according to DIN EN 60529 | IP 20 | IP 54 | IP 54 |
Voltage | 220 - 240 / 100 - 120 V | 3 x 400 / 3 x 230 V | 3 x 400 / 3 x 230 V |
Frequency | 50/60 Hz | 50 Hz | 50/60 Hz |
Power input | 1100 W | 2200 W | 2600 W |
Powerful dispersing instrument for volumes from 0.25 - 30 l (H2O) with digital speed display. It offers a wide speed range from 600 – 10,000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.
The dispersing tool is not included in the scope of delivery. Scope of delivery
|
Extremely powerful dispersing instrument for volumes from 2 - 50 l (H2O) for typical pilot plant stations. A fixed speed of 7200 rpm enables users to work at a high circumferential speed even with small rotor diameters. Three rotor-stator configurations guarantee a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.
The device requires a 3-phase electricity supply in order to operate. The connection of the unit to the power supply must be done by a qualified electrician. Wiring diagrams are included in the manual for reference. Scope of delivery
|
Extremely powerful dispersing instrument for volumes from 2 - 50 l (H2O) for typical pilot plant stations with digital speed display. It offers a wide speed range from 1000 – 9,500 rpm that enables users to work at high circumferential speeds even with small rotor diameters. Three rotor-stator configurations guarantee a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.
The device requires a 3-phase electricity supply in order to operate. The connection of the unit to the power supply must be done by a qualified electrician. Wiring diagrams are included in the manual for reference. Scope of delivery
|
-
ManufacturerIKA-Werke GmbH & Co. KG
-
Country of OriginGermany
-
Viscosity Max5000 mPas
-
Volume Range Max. (H2O) (L)30, 50
-
Speed Max10000 rpm, 7200 rpm, 9500 rpm
-
ModelT 50 Digital ULTRA-TURRAX®, T 65 Basic ULTRA-TURRAX®, T 65 Digital ULTRA-TURRAX®
What does ”continuous operation“ mean for dispersers? Are 4 hours OK?
4 hours equates to continuous operation! A further particle size reduction with rotor-stator systems does not happen after more than 15 mins. Only heat (due to friction) is transferred into the medium. For the drive itself, continuous operation is not a problem.
Due to the technical data, the ambient temperature of a disperser is 5 – 40 °C. What can be done, if the sample requires higher temperatures?
The prescribed ambient temperature of 5 – 40 °C is only valid for the drive. Of course, it is possible to work in mediums with higher temperatures, e.g. a dispersing element with ”N“ (PTFE) bearing can be used in mediums up to 180 °C.
Is it possible to disperse an abrasive material such as sand, glass or similar material?
In general, it is possible to disperse abrasive material, but a frequent change of the bearing is necessary. In addition, the shaft and spindle can wear off very quickly under these conditions.
Is it possible to disperse frozen samples?
Yes, in general this is possible if the sample is treated in some liquid. However, it is not possible to work with liquid nitrogen.
The teflon seal (PTFE) of my dispersing element is ripped. Can a new one be ordered?
Those PTFE parts are slotted and it is not a defect. They are used as a bearing. However, a new seal may be ordered from the spare parts list.
How often can we use disposable dispersing elements for the T 10 basic, T 18 basic and T 25 digital?
The disposable dispersing tools are designed for single use only.
Does IKA offer high pressure dispersers?
Yes, it is possible to work under a pressure of up to 6 bar with dispersing tools having ”KV“ in their product description. IKA also offers High Pressure Homogenizer system.
How does one avoid foam generation during dispersing?
To avoid this scenario, a ULTRA-TURRAX® disperser with “KV“ tools are recommended. These tools are closed systems, which avoid the generation of foam.
The ULTRA-TURRAX® dispersing elements should not run dry. Does that mean that the bottom bore hole has to be in the medium?
Yes, the circulation hole should be in the medium on all accounts. This is the only way to guarantee the optimum cooling effect on the bearing.
Which is the right dispersing tool to crush vegetables and fruits? How should one clean this properly (sterile)?
The new Saw Tooth (ST) dispersing tools and a T 50 digital with cutting head S 50 N - W 65 SK would be suitable for this application. This tool can be cleaned. e.g. with acetone or every commonly used sterilization method.