Daicel CHIRALPAK ® IH-3 / CHIRALPAK® IH/Daicel CHIRALPAK ® IH-U Chiral Columns
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-methylphenylcarbamate]
IH solvent-resistant chiral column, the surface of the silica gel is covalently bonded with amylose-tris[(S)-α-methylphenylcarbamate].
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration.
Solvents that can be used are, for example:
Normal phase: n-Hexane, IPA, EtOH
Special mobile phase: Ethyl acetate, CH 3 Cl, THF, MTBE
Reversed phase: H 2 O, IPA, MeOH
-
Daicel 89322 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 50mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89323 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 100mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89324 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 150mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89325 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 250mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89394 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 2.1mm, 150mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89395 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 2.1mm, 250mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89311 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Guard Cartridges (Pack of 3) , 4mm, 10mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89335 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Semi Preparative HPLC Chiral Column, 10mm, 250mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89345 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Semi Preparative HPLC Chiral Column, 20mm, 250mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89337 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Guard Semi Preparative HPLC Chiral Column, 10mm, 20mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89375 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Preparative HPLC Chiral Column, 30mm, 250mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89355 CHIRALPAK ® IH Polysaccharide Derivatives Solvent-based Preparative HPLC Chiral Column, 50mm, 250mm, 5µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89522 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 50mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89523 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 100mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89524 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 150mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89525 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 4.6mm, 250mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89511 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Guard Cartridges (Pack of 3) , 4mm, 10mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89592 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 2.1mm, 50mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89593 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 2.1mm, 100mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89594 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 2.1mm, 150mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89595 CHIRALPAK ® IH-3 Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 2.1mm, 250mm, 3µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89U82 CHIRALPAK ® IH-U Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 3mm, 50mm, 1.6µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89U83 CHIRALPAK ® IH-U Polysaccharide Derivatives Solvent-based Analytical HPLC Chiral Column, 3mm, 100mm, 1.6µm
Filler particle size CHIRALPAK ® IH-3: 3μm
CHIRALPAK ® IH: 5μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa. pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® IH-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® IH: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 89423 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 100mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89422 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 50mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89424 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 150mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89425 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89435 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Semi Preparative HPLC Chiral Column, 10mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89445 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Semi Preparative HPLC Chiral Column, 20mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89475 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Preparative HPLC Chiral Column, 30mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89455 CHIRALPAK ® IH SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Preparative HPLC Chiral Column, 50mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89S94 CHIRALPAK ® IH-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 2.1mm, 150mm, 3µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89S95 CHIRALPAK ® IH-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 2.1mm, 250mm, 3µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89S82 CHIRALPAK ® IH-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 3mm, 50mm, 3µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89S83 CHIRALPAK ® IH-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 3mm, 100mm, 3µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 89S84 CHIRALPAK ® IH-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 3mm, 150mm, 3µm
Covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
CHIRALPAK ® IH-3/SFC, CHIRALPAK ® IH/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-tris[(S)-α-tolylcarbamate]
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH 3 Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)