Daicel CHIRALPAK ® ID-3 / CHIRALPAK ® ID / CHIRALPAK ® ID-U Chiral Columns
Covalently bonded to the surface of silica gel with amylose-tris(3-chlorophenylcarbamate)
ID solvent-resistant chiral column, the surface of the silica gel is covalently bonded with amylose-tris(3-chlorophenylcarbamate).
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration.
Solvents that can be used are, for example:
Normal phase: n-Hexane, IPA, EtOH
Special mobile phase: Ethyl acetate, CH 3 Cl, THF, MTBE
Reversed phase: H 2 O, IPA, MeOH
-
Daicel 84224 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 150mm, 20µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84225 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 250mm, 20µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84226 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 300mm, 20µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84322 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 50mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84323 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 100mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84324 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 150mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84325 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 250mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84394 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 2.1mm, 150mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84395 CHIRALPAK ® ID Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 2.1mm, 250mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84256 CHIRALPAK ® ID Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 50mm, 500mm, 20µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84266 CHIRALPAK ® ID Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 100mm, 500mm, 20µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84375 CHIRALPAK ® ID Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 30mm, 250mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84355 CHIRALPAK ® ID Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 50mm, 250mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84335 CHIRALPAK ® ID Semi Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 10mm, 250mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84345 CHIRALPAK ® ID Semi Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 20mm, 250mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84337 CHIRALPAK ® ID Guard Semi Preparative HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 10mm, 20mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84311 CHIRALPAK ® ID Guard Cartridges (Pack of 3) , Polysaccharide Derivatives Solvent-based Chiral Columns 10mm, 4mm, 5µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84522 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 50mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84523 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 100mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84524 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 150mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84525 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 4.6mm, 250mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84592 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 2.1mm, 50mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84593 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 2.1mm, 100mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84594 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 2.1mm, 150mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84595 CHIRALPAK ® ID-3 Analytical HPLC Chiral Column, Polysaccharide Derivatives Solvent-based Chiral Columns 2.1mm, 250mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84511 CHIRALPAK ® ID-3 Guard Cartridges, (Pack of 3), Polysaccharide Derivatives Solvent-based Chiral Columns 4mm, 10mm, 3µm
Filler particle size CHIRALPAK ® ID-3: 3μm
CHIRALPAK ® ID: 5μm
CHIRALPAK ® ID-U: 1.6 μm
pressure In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30 MPa.
CHIRALPAK ® ID-U recommends maintaining pressure below 70 MPa
pH value pH 2.0~9.0 temperature 0~40°C Storage solvent CHIRALPAK ® ID-3: n-Hexane/2-Propanol = 90/10 (v/v)
CHIRALPAK ® ID: n-Hexane/Ethanol = 90/10 (v/v)
-
Daicel 84423 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 100mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84422 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 50mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84424 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 150mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84425 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84435 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Semi Preparative HPLC Chiral Column, 10mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84445 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Semi Preparative HPLC Chiral Column, 20mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84475 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Preparative HPLC Chiral Column, 30mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84455 CHIRALPAK ® ID SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Preparative HPLC Chiral Column, 50mm, 250mm, 5µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84S82 CHIRALPAK ® ID-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 3mm, 50mm, 3µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84S83 CHIRALPAK ® ID-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 3mm, 100mm, 3µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84S84 CHIRALPAK ® ID-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 3mm, 150mm, 3µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84S94 CHIRALPAK ® ID-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 2.1mm, 150mm, 3µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84S95 CHIRALPAK ® ID-3 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 2.1mm, 250mm, 3µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)
-
Daicel 84G24 CHIRALPAK ® ID-10 SFC Supercritical Fluid Chromatography Polysaccharide Derivatives Solvent-Rich Analytical HPLC Chiral Column, 4.6mm, 150mm, 10µm
Covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate
CHIRALPAK ® ID-3/SFC, CHIRALPAK ® ID/SFC solvent-resistant chiral column, covalently bonded to the surface of silica gel with amylose-3-chlorophenylcarbamate.
Solvent use is unlimited, extensive dissolution conditions, any miscible solvent can be used as mobile phase, dissolved sample, chiral column regeneration. It also has the high pressure resistance necessary for use on SFC.
Solvents that can be used are, for example:
Main mobile phase: CO 2
Auxiliary solvents: Ethyl acetate, CH3Cl, THF, MTBE, n-Hexane, IPA, EtOH, H 2 O, IPA, MeOH (less than 30%)