Hanna Instruments HI-93701-03 Free Chlorine Reagent, DPD Method, 300 Tests
The HI-93701-03 are reagents for the colorimetric determination of free chlorine, for use with Hanna’s line of compatible benchtop and portable meters. These high quality reagents are clearly marked with the lot number and expiry date on each packet for traceability.
Specifications
| Package | packets | |
| Quantity | 300 tests | |
| Method | adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G. The reaction between chlorine and the reagents causes a pink tint in the sample. |
The HI-93701-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-93701-03 reagent to the sample, the reaction will take place and one of Hanna’s compatible benchtop or portable meter will determine the concentration from the colour that is produced. The results will be displayed in mg/L (ppm) of free chlorine. These reagents are designed to be used with samples that have an expected range of 0.00 to 5.00 mg/L free chlorine.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
