Full visibility of samples
Easy access to the working chamber
Many applications:
- Plant propagation
- Humidity tests
- Simulation of tropical conditions
- Incubation of complete instruments
Choice of analog or digital control

Constructed from clear Acrylic® polymer to give total visibility of samples at all times. Designed for easy access with a hinged front door panel. Each side panel has 2 x 10mm diameter plugged holes for the introduction of either gases or cables. The incubator does not have a base so that it can be placed directly over complete instruments (base is available as an accessory). Forced air circulation and electronic temperature control ensure accurately maintained conditions.

For analog model SI60, setting the temperature is via a calibrated knob. For the digital model SI60D, setting the temperature is more accurately achieved via the LCD. The latter also gives a constant reading of actual temperature. Both models have a push switch pre-set at 37°C. Additionally, there is a temperature safety cut-out set at 72°C.

The incubator is supplied flat packed, for assembly at the point of use. Assembly is simple and requires only a screwdriver.