Stuart Scientific SI30H Hybridisation Oven, Ambient + 8°C to 80°C, 20 Litres, 230V, 50Hz, 350W

Not rated yet
0

 

Nominal capacity20 litres
Temperature rangeAmbient + 8°C to 80°C
Temperature fluctuation (at 37°C)±0.5°C
Temperature variation±0.5°C
Display typeLED
Display resolution0.1°C
Rotational speed range2 to 10rpm
Rocker speed range5 to 70 oscillations minute
Internal dimensions (w x d x h)250 x 230 x 200mm
Overall dimensions (w x d x h)380 x 380 x 435mm
Net weight24kg
Electrical supply230V, 50Hz, 350W
  • £2837.08
Qty:  
  • Compact design
  • Rotisserie and rocker in one unit
  • Up and over the door for accessibility
  • Accurate temperature control
  • Advanced safety features
  • Variable speed control


A very versatile 20-liter hybridization incubator and combined rocker shaker only require a minimum of bench space. The incubator temperature is accurately set via the easy-to-use encoder controls and displayed by a bright LED. Forced air circulation combined with microprocessor control means outstanding temperature uniformity.

The `safety first' design includes an over-temperature protection system that automatically tracks the set temperature and controls the heater in the event of a fault. The smart system displays error codes indicating a fault has occurred or if the set temperature has been interrupted. The incubator also cuts power to the motor if it overheats or stalls.

The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over door mechanism gives excellent access to the incubator.

Conversion of the unit to a rocker shaker is fast and easy. Simply remove the rotisserie and pull forward the platform located at the rear of the incubator. The gentle rocking action is ideal for the washing stage of most hybridization procedures. Rocking speed is fully variable allowing optimization depending on the application. A range of hybridization bottles are available made from tough Pyrex® glass and leak-proof PTFE faced screwcaps

 

Hybridization bottles

Bottle hybridization minimizes probe volumes, reduces reagent volumes, and enhances signal intensity.

Made from Pyrex® borosilicate glass Stuart hybridization bottles are robust and can easily withstand the temperatures of the most rigorous hybridization techniques. The thermoplastic polyester caps are very rigid and will not distort during repeated heating in the incubator which can lead to leakage. The seal is made by a PTFE-faced insert that covers the entire inside of the cap making very good contact with the glass thread.

Available in three sizes, each bottle comes complete with a cap and a care leaflet.

Model
Overall length
O.D
I.D
Wall thickness
SI20H/3
260mm
40mm
33.6mm
3.2mm
SI20H/4
260mm
75mm
68.6mm
3.2mm
SI20H/5
170mm
40mm
33.6mm
3.2mm
 


Model
Description
SI30H
Hybridization incubator / shaker supplied with 1 x rotisserie
SI20H/1
Spare rotisserie for 7 x 40mm diameter bottles (holds 6 plus 1 in the center)
SI20H/2
Accessory rotisserie for 2 x 75mm diameter bottles
    • SKU
      SI30H
    • Commodity Codes
      85141080
  • Manufacturer
    Stuart Equipment (part of Cole-Parmer)
  • Country of Origin
    United Kingdom