Retsch Cyclone Mill TWISTER, complete with rotor, grinding ring, sieve section (1.0 mm and 2.0 mm) and 10 sample bottles 250 ml, 220–240 V, 50/60 Hz
The rotor mill series includes Ultra Centrifugal Mills, Rotor Beater Mills and Cross Beater Mills. Depending on the particular instrument they are suitable for the preliminary and fine size reduction of soft, fibrous and also hard materials.
||grinding prior to NIR analysis
|Field of application
||agriculture, foods / feeds, medicine / pharmaceuticals
|Size reduction principle
|Material feed size*
||< 10 mm
||< 250 µm
|Batch size / feed quantity*
||< 250 ml
||10,000 / 12,000 / 14,000 min-1
|Rotor peripheral speed
||52 / 62 / 93 m/s
||1 mm / 2 mm
|Electrical supply data
|W x H x D closed
||449 x 427 x 283 mm
In the cyclone mill TWISTER size reduction is effected by impact and frictionbetween the rotor and the friction surface of the fixed grinding ring. The feed material passes through the hopper (with splash-back protection) onto the rotor which is rotating with high speed and is thus submitted to preliminary size reduction. The sample is then thrown outwards by centrifugal acceleration and is pulverized between rotor and grinding ring. The 2-step grinding ensures particularly gentle but fast processing. The feed material only remains in the grinding chamber for a very short time. The integrated cyclone provides cooling of the sample and the grinding tools. This guarantees preservation of the sample properties to be determined. The ground material is separated in the cyclone and collected in a sample bottle.
Subject to technical modifications and errors
The cyclone mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through theintegrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content.
The provided sieves guarantee an optimum particle size distribution so that it is not necessary to recalibrate the NIR spectrometer. The rotor speed can be adjusted in 3 steps allowing for perfect adaptation to the sample requirements. Cleaning the mill is quick and easy as the air jet effects a complete discharge of the material from the grinding chamber.
This new cyclone mill in proven RETSCH quality optimizes the reproducible sample preparation to NIR analysis thus allowing for meaningful and reliable analysis results.
cereals, corn, feed pellets, forage, pasta, pharmaceutical products, rice, soy, tobacco, ... continue to application database
- ideal for grinding feeds, grains, forage and other similar products
- 3 controlled speeds
- cyclone separator with 250 ml collecting bottle for quick extraction of sample
- no cross contamination thanks to easy cleaning
- convenient operating panel
- robust industrial motor 900 W with long lifetime