The Mettler Toledo InLab® 413 SG pH electrode is a versatile, combination pH electrode with integrated temperature sensor and fixed cable with BNC/Cinch (RCA) connector.
Ideal for a wide range of applications including emulsions, suspensions, effluent water and solutions containing proteins and sulphides
The InLab® 413 electrode has been designed with long life in mind. The fine-pored ceramic junction used in conventional electrodes can easily become contaminated in critical media such as suspensions and wastewater. In contrast the InLab® 413 electrode with a solid polymeric electrolyte requires no junction at all. As a result these sensors are particularly insensitive to contamination.
The reference electrode on these sensors is in direct contact with the measured medium by means of two open junctions, hence there is no junction to block.
In addition, the high grade plastic (PEEK) shaft offers a high level of chemical resistance and robustness.
Service life and measurement accuracy are further improved by the [tm="ARGENTHAL" reference system which reduces loss of silver chloride from the reference wire at differing sample temperatures.
• High grade plastic shaft (PEEK)
• Polymer electrolyte XEROLYT™
• Open junction
• ARGENTHAL™ reference
• Integrated temperature sensor
Technical Specifications
Type of sensor | Combined pH electrode with temperature probe |
Measuring range | pH 0 – 14 |
Temperature range | 0 °C – 100 °C |
Cable and connectors | 1.8 m cable BNC (IP67 old)/RCA (Cinch) |
Type of junction | Open junction |
Reference System | ARGENTHAL™ |
Reference electrolyte | XEROLYT® Polymer |
Type of membrane glass | U glass |
Membrane resistance (25°C) | < 250 MΩ |
Shaft Material | PEEK |
Shaft length | 120 mm |
Shaft Diameter | 12 mm |
ISM | No |
Temperature probe | NTC 30 kΩ |
Probe is fully protected against ingress of water and dust (IP67 rated).
A combination pH electrode with integrated temperature probe, PEEK shaft and fixed cable. Designed for portable applications in the lab and outdoors; robust and maintenance-free.
IP67 - For a water-proof measurement
Ensures your entire portable measuring system (MP/MI 12X meter and InLab sensor) is able to withstand wet and demanding environments.
For the toughest conditions
PEEK shaft with excellent chemical and mechanical resistance, a real heavy-duty sensor.
Junction-Free, Worry-Free
Thanks to the solid XEROLYT® reference electrolyte, no membrane junction is needed. No junction, no clogging.
Legal Information
- ARGENTHAL is a trademark of Mettler-Toledo, Inc.
- InLab is a registered trademark of Mettler-Toledo, Inc.
- SevenGo is a trademark of Mettler-Toledo, Inc.
- XEROLYT is a trademark of Mettler-Toledo, Inc.