- This electrode is designed for standard measurements of general solutions. The epoxy body makes it especially suitable for field measurements or use in education. The electrode is gel filled.
- This probe is supplied with models 550 and 570 and can be used with the following Jenway pH meters: - 3510, 3520 and 3540.
- Previously Jenway 924001
Parameter |
Specification |
Type |
Combination |
Sealed/refillable |
Sealed |
End type |
Bulb (with protective cover) |
pH Range |
0-14 |
Temperature range |
0-80°C |
Reference type |
AgCl, gel filled single junction |
Junction type |
Porous Teflon |
Body material |
Epoxy |
Dimensions (length x diameter) |
120mm x 12mm |
Cable Length |
1 metre (nominal) |
Termination |
BNC |
Isopotential |
0 ± 20mV |
Slope |
56 to 61.7mV/pH @ 25°C |
Response time |
95% of final reading in <30 seconds |
Stability |
<1mV (between 1 and 2 minutes) |
Impedance |
<300MΩ @ 25°C |