LTE Scientific OP 60-MF Fan Convection Laboratory Oven, 40°C to 250°C Temperature Range, 60 Litres Capacity
Specifications
Model | OP 60-M |
Temperature range (°C) | 40°C to 250°C |
Capacity (l) | 60 |
Convection type | Fan Convection “M” Models: Our multi-program controller will allow upto 8 multiple-step cycles to be stored in the memory at any one time. It also incorporates a selectable temperature ramping function, which allows controlled temperature rise and fall rates to be programmed into a cycle. At the end of a program sequence, the controller can be programmed to stop or repeat the sequence again. The repeat function can be programmed for a specified number of repeats or it can repeat continuously until interrupted. Following a mains power failure, “M” models have 3 recovery options (cycle hold, start cycle from the beginning or re-start cycle from point of interruption). |
Shelves supplied (max.) | 2 (6) |
Max. load per shelf (kg) | 12 |
Int. W×D×H (mm) | 400×400×400 |
Ext. W×D×H (mm) | 735×575×590 |
Max. power consumption (W) - U/M models | 850 |
Power consumption tubes (W) - UF/MF models | 1000 |
Weight (kg) | 50 |
Temperature variation (spatial) (°C) | ±1,0 |
Temperature fluctuation (time) (°C) | ±0,2 (UF/MF) or ±0,25 (U/M) |
OP Ovens provide solid build quality and reliable performance and are ideal for a wide range of laboratory, research and industrial applications.
The OP Series of ovens offers maximum flexibility and unparalleled performance for the ever-increasing demands of today’s laboratory and process facility. Traditional quality and modern manufacturing techniques linked with LTE’s built-in reliability mean that the OP Series represents excellent value
Flexibility – The OP Series is available in 4 sizes from 60 to 250 litres. Customers can choose between fan circulated or natural convection options, plus there is a choice of PID control systems to suit most applications as detailed below:
“U” Models: This Uni-program system offers single temperature selection and control at the push of a button. Following a mains power failure, the controller will automatically re-instate
“M” Models: Our multi-program controller will allow upto 8 multiple-step cycles to be stored in the memory at any one time. It also incorporates a selectable temperature ramping function, which allows controlled temperature rise and fall rates to be programmed into a cycle. At the end of a program sequence, the controller can be programmed to stop or repeat the sequence again. The repeat function can be programmed for a specified number of repeats or it can repeat continuously until interrupted. Following a mains power failure, “M” models have 3 recovery options (cycle hold, start cycle from the beginning or re-start cycle from point of interruption).
RS232 or RS485 communication ports can be added to all ”M” models.
Performance – Fast heat-up times, almost undetectable overshoot and superb accuracy (see table on page 4) make the OP Series a class-leading product. All OP Series ovens incorporate a manual reset over-temperature cut-out, in line with IEC1010-2-010
Features
- Choice of PID temperature control systems
- Temperature range 40 to 250°C
- Digital display of set and actual temperatures (and programmed features on “M” Models)
- Communication port options
- Class 2 Over-temperature protection
- Stainless steel radiused interiors
- Anti-bacterial epoxy powder coating
- Adjustable vent
- Choice of natural convection or fan circulated Sizes from 60 to 250 litres