LMS Accessories for Cooled Incubators
ZoomCreated with Sketch.

LMS Accessories for Cooled Incubators

Score: 5.00 (votes: 1)
No reviews.
LMS is a brand name of Dulas Life Sciences
authoriseddistributor.png ezgif-2-bbd2100077_e4ca16fae1ae75348ca4916c5e80a7b7.png

 

LMS Accessories for Cooled Incubators are additional components and add-ons designed to enhance the functionality, performance, and usability of LMS cooled incubators. These accessories support a wide range of laboratory applications, offering features such as better temperature control, storage optimization, and monitoring capabilities

SKU Type Suitable For Installation Type Weight (In Grams) Price (excluding VAT) Availability Qty To Purchase
LMS Accessories for Cooled Incubators AHL24 Manual High and Low Alarm All Cooled Incubators Factory Fitted At Time Of Order 400 £550.00 1 + -
LMS Accessories for Cooled Incubators IS13 Internal 13 Amp Socket All Cooled Incubators Factory Fitted At Time Of Order 300 £211.20 1 + -
LMS Accessories for Cooled Incubators DRY01 Drying Mode UpGrade All Cooled Incubators Factory Fitted At Time Of Order 700 £1092.30 1 + -
LMS Accessories for Cooled Incubators PPS5 Pre-Programming Service All Cooled Incubators Factory Fitted At Time Of Order 300 £159.50 1 + -
LMS Accessories for Cooled Incubators CR03 Chart Recorder (Paperless) All Cooled Incubators Factory Fitted At Time Of Order 2400 £187.50 1 + -
LMS Accessories for Cooled Incubators IPD07 Inner Perspex Door Model 80 Factory Fitted At Time Of Order 4500 £546.70 1 + -
LMS Accessories for Cooled Incubators IPD08 Inner Perspex Door Model 120 Factory Fitted At Time Of Order 5000 £674.30 1 + -
LMS Accessories for Cooled Incubators IPD09 Inner Perspex Door Model 201 Factory Fitted At Time Of Order 5500 £740.30 1 + -
LMS Accessories for Cooled Incubators IPD10 Inner Perspex Door Model 280 Factory Fitted At Time Of Order 6000 £799.70 1 + -
LMS Accessories for Cooled Incubators IPD06/3 Inner Perspex Door Model 100 Factory Fitted At Time Of Order 6500 £0.00 1 + -
LMS Accessories for Cooled Incubators IPD06/1 Inner Perspex Door Model 200 Factory Fitted At Time Of Order 7000 £867.90 1 + -
LMS Accessories for Cooled Incubators IPD06/4 Inner Perspex Door Model 300 Factory Fitted At Time Of Order 7500 £867.90 1 + -
LMS Accessories for Cooled Incubators IPD06 Inner Perspex Door Model 400 Factory Fitted At Time Of Order 8000 £867.90 1 + -
LMS Accessories for Cooled Incubators IPD13 Inner Perspex Door Model 600 Factory Fitted At Time Of Order 8500 £867.90 1 + -
LMS Accessories for Cooled Incubators IPD14 Inner Perspex Door Model 1200 Factory Fitted At Time Of Order 9000 £1733.60 1 + -
LMS Accessories for Cooled Incubators DG21 Double Glazed Door Model 280 Factory Fitted At Time Of Order 7000 £872.30 1 + -
LMS Accessories for Cooled Incubators DG14 Double Glazed Door Model 210 Factory Fitted At Time Of Order 8000 £998.80 1 + -
LMS Accessories for Cooled Incubators DG15 Double Glazed Door Model 220 Factory Fitted At Time Of Order 9000 £927.30 1 + -
LMS Accessories for Cooled Incubators DG16 Double Glazed Door Model 230 Factory Fitted At Time Of Order 11100 £960.30 1 + -
LMS Accessories for Cooled Incubators DG17 Double Glazed Door Model 240 Factory Fitted At Time Of Order 12500 £1109.90 1 + -
High/Low Alarm Option Inner Perpex Door Chart Recorder Paperless
The high/low alarm is a manually adjusted alarm option fitted to the instrument’s front panel. When fitted, this
instrument supplements the digital control on the control panel with a contact thermometer, having a ‘Red’ upper
limit pointer and a ‘Green’ lower limit pointer. This unit, being electro-mechanical, is not dependent on the normal
control electronics and therefore will take over control in an emergency situation and maintain some form of
control however coarse.
In the event of an alarm condition, the following action will be taken:
An audible alarm will sound and a secondary safety system will be activated, preventing the cooled incubator
temperature from rising above or falling below the set alarm limits.
To set up, ensure the pointer is wound well up in the case of the Red and down in the case of the Green. Set the
control temperature by means of the digital controller and allow the incubator to stabilise at the required control
point. Once this is achieved the pointers may be realigned as close as required to the set point after making due
allowances for contingencies such as door opening etc.		 On incubators fitted with this feature and depending on the temperature difference between the inner working
chamber and the space between the inner and outer doors, some slight distortion may occur to the Perspex door.		 The LMS paperless chart recorder has been factory configured for optimum performance.
The chart recorder will automatically start once the cabinet is plugged into a mains supply. It will go through an
initialisation procedure and once complete it should look like the display above, which shows a vertical chart between -
20.0°C to +60.0°C. You may press either the up or down arrow button to change the display to a horizontal position if
preferred.
The chart recorder takes a reading of the temperature every 10 seconds and stores this in the internal memory. With this
setting the memory is capable of storing approximately 2 years of continuous data.
However we would recommend that you download the data using a USB stick (not greater than 8GB) on a weekly or
monthly basis.
    • Weight (In Grams)
      400 g
    • SKU
      AHL24
    • Commodity Codes
      84198990
  • Manufacturer
    LMS is a brand name of Dulas Life Sciences
  • Country of Origin
    United Kingdom
  • Type
    Manual High and Low Alarm, Internal 13 Amp Socket, Drying Mode UpGrade, Pre-Programming Service, Chart Recorder (Paperless), Inner Perspex Door, Double Glazed Door
  • Suitable For
    All Cooled Incubators, Model 80, Model 120, Model 201, Model 280, Model 100, Model 200, Model 300, Model 400, Model 600, Model 1200, Model 210, Model 220, Model 230, Model 240
  • Installation Type
    Factory Fitted At Time Of Order, Not Applicable

Accessories