LEEC PL3 Plant Growth and Seed Germination Cabinets, With Stainless Steel Chamber Interior, 0 °C to +60 °C Temperature Range, 320 Litre Capacity for Drosophila/Fruit Fly Research

Drosophila is a genus of flies, belonging to the family Drosophilidae, whose members are often called "small fruit flies" or pomace flies, vinegar flies, or wine flies, a reference to the characteristic of many species to linger around overripe or rotting fruit  

Includes for Drosophila/Fruit Fly Research

  • Fruit Fly Modification
SPECIFICATION     

MODEL

PL3 / SL3

Temperature Range* Lights OFF

 

0°C to +60°C

 

Temperature Range* Lights ON

 

+5°C to +60°C

 

Temperature Control Lights OFF


Typically ±0.2°C

 

Temperature Variation Lights OFF

Typically ±0.5°C

 

Refrigerant


R134a

Timers



All models are fitted with a digital 24 hour timer to control the day/night cycle of lights on and off 

(7 day optional)

 

Chamber


Stainless Steel

 

Exterior finish



White polyester powder coated steel

 

Castors


No

 

Access port


 2 x 12mm

 

Insulation


Expanded PU foam

 

Chamber capacity


320 litres

 

Dimensions (External)

 


1745 H mm

635 W mm

660 D mm

 

Dimensions (Internal)

 

 

1275 H mm

510 W mm

490 D mm

 

Shelves


6

 

Weight


145 KG

 

Power rating


900 W

 

  * Temperature specification for models PL2 & SL2 at 20°C ambient


  • £4634.00
Qty:  

LEEC Plant Growth / Germination Cabinets are based upon the LEEC Precision cooled incubators. They have internal lighting, digital temperature cycling and digital light timers as standard to simulate day and night conditions. 

Temperature Control 

LEEC Plant Growth Cabinets use the same microprocessor based digital temperature control system as the cooled incubators on which they are based. The temperature is cycled using a digital 24 hour timer as standard, or alternatively a 7 day digital timer can be specified for no extra cost. Digital over and under temperature protection and alarms are fitted as standard to all models. The chambers are fan assisted for optimum temperature performance and stability, which in turn provides reliable, accurate storage for samples. 

Illumination 

All models are fitted with a digital 24 hour digital light timer to control the day / night light cycle. Each incubator door is fitted with a pair of white fluorescent tubes. These give a lighting intensity of approximately 3000 lux in the chamber. For higher lighting intensities and extra lights can be added. All lights are mounted vertically in the outer door. Each door is vented at the top and bottom to allow unwanted heat to escape from the light tubes. Plant Growth Cabinets fitted with four or more light tubes in each door also have a small extract fan in the door to help with heat removal. This helps to maintain stable temperature control, especially at lower chamber temperatures. The lowest temperature setpoint is slightly different when the lights are ON due to a small amount of heat that escapes from the lights into the chamber. 

High Humidity Models 

Two models (SL2 & SL3) have sealed, water tight chambers. These should be used when high levels of humidity are required inside the chamber, for wet sample storage or if /RH ultrasonic humidity control is required. Models SL2 and SL3 can also be factory fitted with the optional /RH ultrasonic humidity control system. This microprocessor controlled humidity system allows precise control of RH levels inside the chamber.

    • SKU
      PL3FFM
  • Capacity (L)
    320
  • Temperature Range °C
    0°C to +60°C
  • Chamber
    Stainless Steel
  • Exterior Finish
    White Polyester Powder Coated Steel
  • Dimensions (mm)
    1745 x 635 x 660
  • Timers Included
    Digital 24 Hour
  • Manufacturer
    LEEC Limited

Recommended Accessories