LEEC P33 Fan Circulation Precision Incubator, 5 °C above ambient to +60 °C Temperature Range, 730 Litre Capacity
5° above ambient to +60°C
Typically ±0.1°C at 37°C
|Tempearture Recovery Time||Approx. 6 minutes|
Chamber Capacity (Litres)
External Dimensions (H x W x D mm)
Internal Dimensions (H x W x D mm)
1550 x 1270 x 660
1275 x 1140 x 490
|Power Rating (watts)||600|
This is a heat only incubator. Control near (or below) ambient temperature requires a LEEC recirculating cooler unit.
The LEEC P33 Precision Incubator combines traditional styling and modern controls for precise temperature control in a large capacity chamber.
- Ideal for use at 37.0°C
- Large storage capacity
- Microprocessor temperature controller
- Fan assisted for excellent performance
- Digital over temperature safety cut out
- High quality stainless steel chamber
- CFC-free insulation
- Inner glass doors
LEEC P33 Precision Incubator has a large capacity 730 litre stainless steel chamber, adjustable aluminium shelves and 4 toughened inner glass viewing doors. The outer cabinet is rust-resistant and finished in white, anti-microbial powder coated paint. Two 12mm access ports are provided so that cables for shakers and/or monitoring probes can be passed safely into the incubator.
The heating system consists of a low wattage elements which are specially designed and profiled to eliminate hot spots. Expanding Polyurethane insulation is foamed in-situ to help ensure optimum temperature control and stability. Operation of the incubator at or below room temperature can be achieved when the built in cooling coil is connected to a source of chilled water (e.g. LEEC self contained recirculating cooler unit).
The P33 has fan assisted air circulation via a full-width duct to ensure optimum temperature stability throughout the chamber. When the outer doors are opened, the internal fans stop so that heat loss is kept to a minimum.
The microprocessor temperature controller maintains the set temperature to within 0.1°C. The easy to use temperature controller shows both target and actual temperatures in real time. Indicators show when the heater is active and if an over temperature condition has occurred. The independent over temperature safety cut out is easily adjusted by the user.
All LEEC Precision Incubators (regardless of age) can cool when connected to a LEEC Self Contained Recirculating Cooler Unit.
Every LEEC Incubator is made to order to meet the exacting needs of every customer. LEEC prides itself on being able to deliver exactly what the customer wants and relishes the challenge of producing a Incubator that is tailored to every specific customer need.
Gross Capacity (L)730
Dimensions HxWxD (mm)1550 x 1270 x 660
Temperature Range (°C)5° above ambient to +60°C
ConstructionStainless Steel Interior and Exterior