LEEC P2C Precision Cooled Incubator, 0 °C to +60 °C Temperature Range, 150 Litre Capacity, Stainless Steel Chamber, White Painted Steel Exterior
0°C to +60°C
Typically ± 0.2°C
Typically ± 0.5°C
White painted steel
Inner glass door
Two 12mm ports
Expanded PU foam
(H x W x D) mm
1075 x 635 x 660
(H x W x D) mm
590 x 510 x 490
|Power Rating (w)||800|
*Temperature specification for Model P2C at 20°C ambient.
- Microprocessor controller with digital display.
- Stainless steel chamber. Aluminium shelves.
- Digital over / under temperature protection.
- Inner glass doors.
- Two 12mm cable access ports.
- Energy efficient heating and cooling systems.
- Fan assisted.
- High quality thermal insulation.
LEEC Precision Cooled Incubators are robust in design and offer accurate and reliable temperature controlled storage for your products from 0-60°C
All models are made from rust resistant steel finished in tough white polyester powder coat paint with anti-microbial properties. Inner chambers are made from stainless steel and have adjustable anodized aluminium shelves. All models have inner glass doors. The fan (two in the P33C) circulates the hot and cold air around the chamber via a full-width air duct. Two 12mm access ports are provided so that cables can run into the chamber for shakers, stirrers or temperature monitoring probes. The low wattage heaters are bonded to the outer wall of the chamber and surrounded by expanding polyurethane foam insulation to help achieve optimum temperature stability.
The digital temperature controller accurately controls both the heating and cooling functions. The unique LEEC cooling system controls refrigerant flow to the evaporator, thereby eliminating the possibility of unwanted overcooling. Heating is pulsed by the controller only when required. Pulsing is a very energy-efficient method of achieving stable temperature control and eliminates the need for auto defrost, except when operating at the lowest chamber operating temperatures.
A digital over and under temperature alarm / cut out system provides essential protection for your products inside the chamber. Visual warning lights and audible alarms give clear indications when the chamber temperature is out of limits. The cut out will disconnect the heating or cooling system if an over or under temperature situation occurs.
DIGITAL DUAL TEMPERATURE CYCLING
This option allows the chamber temperature to automatically ramp up and down (or cycle) between two pre-programmed temperatures. Timers are available in 24 hour or 7 day type.
Every LEEC Precision Cooled Incubator is hand made to order to meet the exacting needs of every customer. LEEC prides itself on being able to deliver exactly what the customer wants and enjoys the challenge of producing an incubator which is tailored to every specific customer need.
Gross Capacity (L)150
Dimensions HxWxD (mm)1075 x 635 x 660
Temperature Range (°C)0°C to +60°C
ConstructionStainless Steel Chamber, White Painted Steel Exterior