LEEC C157 Fan Circulated Incubator, 157 Litre Capacity, At least 5 °C above ambient to +60 °C Temperature Range
(H x W x D mm)
790 x 684 x 620
(H x W x D mm)
573 x 550 x 500
Power Rating (Watts)
At least 5°C above ambient to +60°C
Typically +/-0.1°C at 37°C
Typically better than +/-0.2°C at 37°C
|Temperature Recovery||3 minutes|
- Stainless steel construction
- Energy efficient
- Fully sealed chamber
- Simple to use
- Fan assisted air circulation
- Fast recovery time
- Accurate temperature control
- Radius corners - easy to clean and disinfect
- Replacement for K1, K2 and K3 Compact Incubators
LEEC Classic Incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber.
New profiled resistive wire heating elements and high performance insulation ensure optimum temperature control. All models have gentle fan assisted air circulation. This ensures even temperature distribution throughout the chamber. Fast temperature recovery keeps heat loss to a minimum after door opening.
The latest in microprocessor temperature controller technology gives this incubator range excellent temperature stability to within 0.1°C. Fuzzy Logic and Auto Tune features allow the controller to adapt to each chamber size, optimising their performance and accuracy. The controller is simple to use, with target and actual temperatures being displayed in real time on a two-colour digital display.
Over and under temperature alarm thresholds can be programmed into the controller. An independent safety cut out disconnects the heating elements should an over temperature condition occur. The controller can be password protected too, stopping any unauthorised adjustments to the Set Point and alarm thresholds.
LEEC Classic Incubators are covered by a 1 year warranty.
Every LEEC Incubator is made to order to meet the exacting needs of every customer. LEEC prides itself on being able to deliver exactly what the customer wants and relishes the challenge of producing a Incubator that is tailored to every specific customer need.
Gross Capacity (L)157
Dimensions HxWxD (mm)790 x 684 x 620
Temperature Range (°C)At least 5°C above ambient to +60°C
ConstructionStainless Steel Interior, Enamelled Steel Exterior
Country of OriginUnited Kingdom