Jenway 570 Portable pH Meter, - 2 to 16 pH range, supplied in a carry case with epoxy pH electrode ( 924 001), ATC probe ( 170 100), buffer sachets and batteries

Technical Specification

 

Model570
TypepH, mV and temperature
WaterproofYes (IP66/ 67)
pH Range- 2 to 16
pH Resolution0.01
pH Accuracy± 0.02
mV Range- 1000 to 1000mV
mV Resolution1mV
mV Accuracy± 1mV
ATC0 to 100°C
Temperature Range- 39.9 to 149.9°C
Temperature Resolution0.1°C
Temperature Accuracy± 0.4°C ( - 10 to 70°C)
No.of Calibration Points2
Automatic Buffer RecognitionYes
Auto Shut Off10 mins
Operating Temperature0 to 100°C
Battery Life (hours)2500
pH ConnectorBNC
Temperature ConnectorWaterproof Lumberg screw-locking type
Dimensions (l x w x d)141 x 71 x 32mm
Weight230g
  • £255.15
Qty:  

Model 570 is a general purpose hand held pH, mV and temperature meter. This model offers 2 point calibration and automatic buffer recognition. The unit simultaneously displays either temperature compensated pH readings or electrode potential and temperature. This model has a large easy to read LCD display. The integrated rubber seal ensures that the unit is completely waterproof.

• Simultaneously displays pH or mV and temperature
• Automatic calibration
• Manual or Automatic Temperature Compensation (ATC)
• Auto shut off 10 minutes
• 2500 hours battery life
• Waterproof housing
• 2 year warranty

This meter is supplied ready to use with an epoxy bodied electrode (924 001), a temperature probe (170 100) and buffers and is supplied in a bespoke carry case.

    • SKU
      570271
  • Type
    Portable
  • Manufacturer
    Jenway (part of Cole Parmer)
pplication924 001 027 227 924 067924 002924 005 924 003924 007924 010924 015924 030924 034924 047 924 070924 049924 050 924 052924 051924 076924 077924 078924 079924 080
Agar-----------+ +-----
Alkalines (high)------------+ +--+ ++ +
Beer+ +-+ ++ +-+ +--+ ++ ++ ++ ++ ++ ++ ++ ++ +
Blood products+-+ ++ +-+ ++-++ +++ ++ +++ ++ ++ +
Bread/dough-+ +--+ +--+ +---+-----
Cement+++ ++++-+++-++ +++ ++ ++
Cosmetics+ +++ ++ +++-+++ ++ ++ ++ ++ ++ ++ ++
Dairy products+++ ++ ++ ++-+ +-+ +-+ ++ +++ ++ ++
Drinking water+-+--+--+++ +--++++
Education+ +++ ++++ ++++ +++ ++ ++ ++ ++ ++ ++ +
Fats/cream-++-+ ++-+ +-++++++++
Field use+ ++ ++-+---+ +-+ ++ +++ +++-
Fish products+++++ ++-+ +-+++ ++++++
High temperature---------------+ ++ +
Jam/preserves-------------+ +--+
Lab environmental---+------+ +------
Lab flasks---------+ +----+ +--
Low ionic--+ +--+---++ +-+ +-+ ++ +-
Meat/cheese-+--+ +--+ +---+ +-----
Micro samples---+ ++-++-+-+-----
Paint---+ +-+ +---+ +-+ +----+ +
Photographic------------+ +---+ +
Soil++ ++++ ++-+ +-++-+++++
Surface-----------+ +-----
Test tubes---+--+ +--+ +-----+-
Tris buffer------+ +---+ +-+ +---+
Viscous samples-+--+--+---+ +-+---

Key:
++ Electrode recommended for this sample type
+ Electrode would be satisfactory for use with this sample type
– Electrode is not suitable for this application


Combination pH Electrodes

Part CodeDescription
924 001General purpose, epoxy bodied for standard measurements of general solutions (max. temperature 60°C)
924 067Replacement pH electrode with S7 connector (430, max. temperature 60°C)
924 00212mm stem spear type, glass bodied for measurement of soil and slurry samples
924 003Redox (platinum), glass bodied for redox measurements
924 005General purpose, glass bodied for standard measurements of general solutions
924 0074.5mm semi-micro, 90mm reach, glass bodied for small volume liquid samples
924 010Spear type, 6mm stem, glass bodied for small volume soil and slurry samples
924 078350mm reach probe, glass bodied for measurement in flasks
924 015Glass electrode, pH only requires separate reference electrode
924 0703 in 1 combination pH temperature, epoxy bodied (370, 3505, 3510, 3520 and 3540 max. temperature 100°C)


Application Specific pH Electrodes

Part CodeDescription
924 049Life science, 6mm micro, 150mm reach, glass bodied for test tubes and small sample volumes (max. temperature 100°C)
924 030Tris buffer, semi-micro with 90mm reach, glass bodied for pH measurements in biological buffers, blood and protein samples (max. temperature 50°C)
924 050Environmental, glass bodied, suitable for low ionic strength solutions and purified water (max. temperature 50°C)
924 068Environmental pH electrode with S7 connector (430, max. temperature 50°C)
924 051Food, epoxy bodied, flat membrane, ideal for measurements of food extracts and agar plates (max. temperature 60°C)
924 069Food pH electrode with S7 connector (430, max. temperature 60°C)
924 077Jam electrode, epoxy bodied, ideal for measurements of jam and preserves
924 034Spear knife probe, epoxy based for the measurement of solid samples
924 035Replacement electrode for spear knife probe
924 076Difficult applications, glass bodied for measurement of oils, biofuels and non-aqueous samples and Tris buffers
924 079High temperature probe, glass bodied for measurements up to 110°C
924 080Laboratory electrode, glass bodied for measurement of aggressive chemical solutions


Waterproof pH Electrodes

Part CodeDescription
027 227Waterproof, general purpose, epoxy–bodied with ATC (max. temperature 100°C)
924 052Waterproof environmental with ATC (max. temperature 50°C)
924 053Waterproof 12mm stem spear type, glass bodied with ATC
924 054Waterproof redox (platinum), glass bodied for redox measurements with ATC
924 055Waterproof Tris buffer, glass bodied for pH measurements in biological buffers, blood and protein samples with ATC (max. temperature 50°C)
924 056Waterproof food pH electrode with ATC (max. temperature 60°C)
538 014Adapter lead with waterproof connector to BNC electrode connector


Temperature and Reference Electrodes

Part CodeDescription
027 500ATC/ temperature probe (370, 3505, 3510, 3520 and 3540)
027 502PTFE-coated ATC probe for use with aggressive/corrosive samples (370, 3505, 3510, 3520 and 3540)
924 016Single junction, calomel, glass bodied reference electrode (max. temperature 50ºC)
924 017Double junction, AgCl, glass bodied reference electrode (max. temperature 50ºC)
924 036Single junction, AgCl, glass bodied reference electrode (max. temperature 100ºC)

Jenway offer a range of pH buffers either as single use sachets or longer lasting 500ml bottles. To care for your Jenway pH electrodes there is also a range of storage solutions and fill solutions tailored to your specific probe.


Ordering Information

Part CodeDescription
025 037pH 4 buffer (red, 500ml)
025 038pH 7 buffer (yellow, 500ml)
025 039pH 10 buffer (blue, 500ml)
025 162pH 9.22 buffer (500ml)
025 163pH 2 buffer (500ml)
025 179pH 4 buffer sachets (pack of 10)
025 180pH 7 buffer sachets (pack of 10)
025 181pH 10 buffer sachets (pack of 10)
025 192pH electrode storage solution (100ml)
025 196pH electrode fill solution 4M KCl, AgCl saturated (150ml)
025 1974M KCl/AgCl partial gel (150ml)
025 1603M KCl pH fill solution (100ml)
025 161pH electrode cleaning solution (500ml)
025 157Redox standard (200mV) (500ml)
025 158Redox standard (300mV) (500ml)

A number of accessories are available for use with the 550 and 570 pH meters:


Ordering Information

Part CodeDescription
033274Carry case for 550 pH meter
033275Carry case for 570 pH meter
170101Temperature probe for 550 pH meter
170100Temperature probe for 570 pH meter