IKA A10 Basic Batch Grinding Mill, Up to 50ml Sample Volume, Max Speed 25000 rpm

Not rated yet

Technical Data

Process typebatch
Operating principlecutting/impact
Motor rating input300 W
Motor rating output240 W
Speed max.25000 rpm
Speed deviation±500 rpm
Circumferential speed max.73 m/s
Useable volume max.50 ml
Feed hardness max.5 Mohs
Feed grain size max.6 mm
Material beater/cutterstainless steel 1.4034
Material milling chamberstainless steel 1.4301
Power-ON time5 min
Power-OFF time10 min
Milling chamber, can be cooled with wateryes
Mill feed can be cooled in milling chamber with dry iceyes
Dimensions (W x H x D)130 x 250 x 145 mm
Weight3.13 kg
Permissible ambient temperature5 - 40 °C
Permissible relative humidity80 %
Protection class according to DIN EN 60529IP 41
Voltage220 - 240 V
Frequency50/60 Hz
Power input300 W
  • £1937.00

The redesigned batch mill grinds hard, brittle, soft, and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily, and aqueous samples can also be grinded.

The development of the mill placed particular emphasis on safety. The mill will only start when the lid is closed and can only be opened at standstill. A quick stop feature further increases the safety of the user.

Test results of the new A 10 basic are comparable with the ones of the previous model A 10, due to the same grinding chamber, cutter geometrics, and speed.

The new mill A 10 basic offers the following features:

  • Digital timer
  • Counter: Display of grinding time
  • Interval function
  • Brushless motor for long service life and low noise level
  • Integrated cooling connections
  • Error code display
  • Simple handling with keypads
  • Easily exchangeable beater/cutter for a variety of applications
  • Grinding chamber reduction for small sample sizes and stainless steel cutter A 10.1 included with delivery
  • Bayonet lock for the lid to enable simple and safe locking

Scope of delivery

  • A 10 basic
  • A 10.1 Stainless steel cutter
  • A 10.4 Grinding chamber reduction
  • Clips for cooling hose (2 pcs.)
  • Felt rings (2 pcs.)
  • Tool kit
    • SKU
    • Commodity Codes
  • Process Type
  • Operating Principle
  • Speed Max (rpm)
  • Useable Volume Max
    50 ml
  • Manufacturer
    IKA-Werke GmbH & Co. KG
  • Country of Origin