Hermle Z 446 Universal High Speed Bench Top Centrifuge, Max Speed 16,000 rpm, Max RCF 24,325 xg, 4 x 750ml Max Volume, 230 V / 50-60 Hz

Not rated yet
0

Specifications

• max. Speed: 16000 rpm

• max. RCF: 24325 xg

• max. Volume: 4 x 750 ml

• Speed range: 200 - 16000 rpm

• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments

• Dimensions (WxHxD): 54 cm x 39 cm x 67 cm

• Weight: 79 kg

Request A Non-Binding Quotation

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.

The fixed-angle and swing-out rotors are suitable for almost all applications in everyday use in clinical, industrial and research laboratories.

Features and functions

• Brushless induction drive
• Microprocessor control
• Active imbalance detection and cut-off
• Motor driven lid lock
• Automatic rotor identifi cation system with over speed protection
• Audible signal at the end of each run
• Emergency lid lock
• Stainless steel chamber
• Pre-selection of running time from 10 sec to 99h 59min or continious
• Simple one handed opertaion      
• Air cooling
• Autoclavable rotors

Display functions
• Diagnostic program
• Program memory for 99 programs
• Quick-key for short runs
• 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
• Permanent indication of preset and actual values
• Pre-selection of speed or RCF in steps of 50/10 increments

    • SKU
      316.00 V01
  • Maximum Speed (rpm)
    16,000
  • Maximum RCF
    24,325
  • Dimensions (mm)
    540 x 390 x 670
  • Maximum Capacity
    4 x 750 ml
  • Manufacturer
    HERMLE Labortechnik GmbH