• 0
Edwards Vacuum A65218992 ATEX RV3 Two Stage Rotary Vane Pump, 400V, 3-ph, 50Hz Ex II 2G IIC T4

Edwards Vacuum A65218992 ATEX RV3 Two Stage Rotary Vane Pump, 400V, 3-ph, 50Hz Ex II 2G IIC T4

Edwards Vacuum

Features and Benefits

  • ATEX rated spot voltage motor.
  • Dual mode. Suitable for high throughput and high vacuum applications.
  • Fast acting inlet valve for system protection.
  • Efficient high pressure lubrication.
  • Oil-tight with printed gaskets, effective shaft seals.
  • Clamped-in sight glass.
  • Oil box well contains filling spills.
  • Hi-tech polymer blades, large diameter, easy-clean oil passages.
  • Consistent, built-in quality, cast bar construction
  • £5411.00
Qty:  

Overview

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and are suitable for use in potentially explosive atmospheres. They share the same internal ATEX classification as our standard RV pumps, namely Ex II 3G c IIB T4. ATEX pumps with flameproof motors require the user to provide 2 off hazardous area cable glands and cables. In addition, connection of the thermistors to an appropriate safety circuit must be made to switch off the pump if overheating occurs. The pumps are supplied with the Gas Ballast port plugged. When pumping flammable gasses or vapours you must fit an inert gas purge to this port to dilute such gases or vapours below the lower explosive limit.
Supplied with 1 litre of Ultragrade 19 oil, inlet filter and O-ring.


Technology

All our RV pumps are significantly quieter – noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor.

The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.

The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.


Applications

  • Hazardous area pumping
    • SKU
      A65218992
  • Manufacturer
    Edwards Vacuum


Displacement

 

RV3 50Hz

3.7 m3h-1 / 2.2 ft3min-1

RV3 60Hz

4.5 m3h-1 / 2.6 ft3min-1

RV5 50Hz

5.8 m3h-1 / 3.4 ft3min-1

RV5 60Hz

7 m3h-1 / 4.1 ft3min-1

RV8 50Hz

9.7 m3h-1 / 5.7 ft3min-1

RV8 60Hz

11.7 m3h-1 / 6.9 ft3min-1

RV12 50Hz

14.2 m3h-1 / 8.4 ft3min-1

RV12 60Hz

17 m3h-1 / 10 ft3min-1

Speed (Pneurop 6602)

 

RV3 50Hz

3.3 m3h-1 / 2 ft3min-1

RV3 60Hz

3.9 m3h-1 / 2.3 ft3min-1

RV5 50Hz

5.1 m3h-1 / 3 ft3min-1

RV5 60Hz

6.2 m3h-1 / 3.6 ft3min-1

RV8 50Hz

8.5 m3h-1 / 5 ft3min-1

RV8 60Hz

10 m3h-1 / 5.9 ft3min-1

RV12 50Hz

12 m3h-1 / 7.1 ft3min-1

RV12 60Hz

14.2 m3h-1 / 8.4 ft3min-1

Max allowed outlet pressure

1 bar gauge / 14 psig

Max allowed inlet and gas purge pressure

0.5 bar gauge / 7 psig

Nominal rotation speed 50/60Hz

1430 / 1710 rpm

Motor power 50/60Hz

550W  (750W for 115V 1ph 60Hz)

Weight (without oil)

 

RV3

28 kg / 61.6 lb

RV5

28 kg / 61.6 lb

RV8

31 kg / 68.2 lb

RV12

32 kg / 70.4 lb

Inlet flange

NW25

Exhaust flange

NW25

Operating temperature range

12 – 40 °C