Edwards Vacuum A36310940 E2M18 Two Stage Rotary Vane Pump, Oil-Sealed, 200-230/380-415V, 3-ph, 50Hz or 200-230/460V, 3-ph, 60Hz
Medium EM series pumps are rugged mechanical oil-sealed pumps with speeds of 18and 28 m3/hr. Compact and quiet, they feature advanced lubrication circuits, high reliability, and accessories to suit specific application needs.
Technical Data
| Displacement (50Hz) |
20.5 m3h-1 / |
| |
12.1 ft3min-1 |
| Displacement (60Hz) |
25.0 m3h-1 / |
| |
14.7 ft3min-1 |
| Speed (Pneurop 6602) 50 Hz |
17.0 m3h-1 / |
| |
10 ft3min-1 |
| Speed (Pneurop 6602) 60Hz |
20.4 m3h-1 / |
| |
12.1 ft3min-1 |
| Ultimate vacuum (total pressure) |
|
| without gas purge |
1 x 10-3 mbar / |
| |
7.4 x 10-4 Torr |
| with gas purge |
1.5 x 10-1 mbar / |
| |
1.1 x 10-2 Torr |
| with Fomblin® |
1 x 10-2 mbar / |
| |
7.5 x 10-3 Torr |
| Inlet connection |
NW25 |
| Outlet connection** |
Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole |
| Max permitted pressure at outlet |
0.5 bar gauge / |
| |
7 psig |
| Max inlet pressure |
20 mbar / |
| for water vapour |
15 Torr |
| Max water vapour pumping rate |
0.3 kg h-1 |
| Operating temp range |
13-40°C |
| Nominal Rotation speed 50/60Hz |
1440/1720 rpm |
| Power connector 1-ph* |
IEC EN60320 C19 |
| Motor power 50 Hz |
0.55 kW |
| Motor power 60 Hz |
0.75 kW |
| Weight |
39 kg / 86 lbs |
| Noise @ 50Hz |
57 dB(A) |
| Oil capacity - max |
1.05 litre |
| Oil capacity - min |
0.75 litre |
| Recommended oil (supplied) |
Ultragrade 19 |
* Pumps listed with IEC connector only
** The FX are supplied with NW25 outlet connection
Features and Benefits
The pump is designed for reliable, long‑term operation.
Thermal overload device prevents overheating (single phase only).
The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor cooling fan.
Full height O ring sealed oil sight glass for easy checking of oil level and condition.
Large sight glass and operating oil range.
IE3 energy efficient 3 phase motor used with E2M28.
Thermal overload device prevents overheating (single phase only).
The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor cooling fan.
Full height O ring sealed oil sight glass for easy checking of oil level and condition.
Large sight glass and operating oil range.
IE3 energy efficient 3 phase motor used with E2M28.
The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.
Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.
Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.
Technology
This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.
Applications
- Analytical instruments - LCMS
- Automotive
- Beam lines and high energy physics
- Centrifuges, ultra-high speed
- Coating
- Cryogenics
- Degassing/curing - oil, epoxy resin
- Distillation/extraction/filtration
- Freeze drying
- Furnaces
- Gas bottle filling/emptying
- Gel drying
- Glove boxes, ovens
- Laboratory bench top vacuum
- Leak detectors, Helium
- Load locks and transfer chambers
- Refrigeration manufacture
- Research and development
- Rotary, centrifugal evaporators
- Scanning electron microscopes - SEM
- SEM/FIB (Ion beam repair)
- Solvent recovery
- Surface science instruments
- Turbomolecular backing pumps
- TV manufacturing / light bulb manufacture
