Edwards Vacuum A34318986 E1M18 ATEX One Stage Rotary Vane Pump, 115V, 1ph, 60Hz Ex II 2G IIC T4
|Displacement (swept volume)|
|50 Hz||1.8 m3h-1 / 1 ft3min-1|
|60 Hz||2.2 m3h-1 / 1.3 ft3min-1|
|Speed (Pneurop 6602)|
|50 Hz||1.6 m3h-1 / 0.8 ft3min-1|
|60 Hz||2.0 m3h-1 / 1.2 ft3min-1|
|Ultimate vacuum (total pressure)|
|without gas ballast||3 x 10-3 mbar / 2.3 x 10-3 Torr|
|with gas ballast||2.5 x 10-2 mbar / 1.9 x 10-2 Torr|
|Inlet connection||NW10 flange|
|Outlet connection**||Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole|
|Maximum permitted pressure at outlet||0.5 bar gauge / 7 psig|
|Maximum inlet pressure for water vapour||15 mbar / 11 Torr|
|Maximum water vapour pumping rate||16 gh-1|
|Motor power 50/60 Hz (IP54)||0.16 kW|
|Nominal rotation speed 50/60Hz||2800/3400 rpm|
|Power connector||IEC EN60320 C13|
|Operating temperature range||12 - 40 °C|
|Weight||10 kg / 22 lbs|
|Noise||54 dB (A) @ 50 Hz|
|Noise with acoustic enclosure||47 dB(A) @ 50Hz|
|Oil capacity - max||0.28 litre|
|Recommended oil (supplied)||Ultragrade 15|
** The FX are supplied with NW25 outlet connection
Features and Benefits
- Approved to external ATEX standards Ex II 2G IIC T4 and Ex II 2G IIB T4, which enables use in hazardous environments.
Supplied with ultragrade 19 oil, NW25 O-ring and centering ring.
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.
- Hazardous area pumping