Coval CRYOLITE-HP Liquid Nitrogen Cryogenic Gloves, Water Resistant Full Grain Leather

Score: 5.00 (votes: 1)
No reviews.
 
SKU Sizes Available To Order Weight (In Grams) Price (excluding VAT) Availability Qty To Purchase
Coval CRYOLITE-HP Liquid Nitrogen Cryogenic Gloves, Water Resistant Full Grain Leather CRYOLITE-HP-8 8 0 £161.04 1000 + -
Coval CRYOLITE-HP Liquid Nitrogen Cryogenic Gloves, Water Resistant Full Grain Leather CRYOLITE-HP-9 9 0 £161.04 1000 + -
Coval CRYOLITE-HP Liquid Nitrogen Cryogenic Gloves, Water Resistant Full Grain Leather CRYOLITE-HP-10 10 0 £161.04 1000 + -
Coval CRYOLITE-HP Liquid Nitrogen Cryogenic Gloves, Water Resistant Full Grain Leather CRYOLITE-HP-11 11 0 £161.04 1000 + -

Cryogenic gloves manufactured with water resistant full grain leather and split leather cuff with Velcro fastener. The internal insulation consists of a soft lining and a special membrane for an excellent waterproofness. Total length 38 cm.

With maximum level of dexterity, CRYOLITE-HP are ideale in case of extreme cold situations, related to industrial activities or climatic conditions.

Tested with contact with liquid nitrogen (-195,32°C) and suitable for use with liquid oxygen. In the cryogenic field these gloves prevent from damages caused by contact cold and splashes of liquid gases.

In compliance with the following standards:

 EN 388 2122X

 EN 407 NEW! Protection against contact heat up to 250°C

 EN 511 341


CRYOGENIC USE


Do not use in case of direct immersion in cryogenic gases. 

Subject to specific test for resistance to liquid nitrogen (-195,82°C) through contact for 1 minute and following bending test (RCT method).

EN 388:2016
Protective gloves against mechanical risks
A) Abrasion resistance  2
B) Cut resistance  1
C) Tear strength  2
D) Puncture resistance  2
Cut resistance ISO 13997  X
Dexterity  5

EN 511:2006
Protective gloves against cold
A) Convective cold 3
B) Contact cold 4
C) Water penetration 1

EN 407:2004
Protective gloves against thermal risks
A) Behaviour at flame X
B) Contact heat 2
C) Convective heat X
D) Radiant heat X
E) Small splashes of molten metal X
F) Large amounts of molten metal X

5-finger cryogenic glove made with water resistant full grain leather, made waterproof by polyolefin Porelle® membrane, polyester fleece lining multilayer (240 gr / sqm). Split leather cuff with Velcro closure. Total length of the glove 38 cm. NYLON® stitching.

PPE CATEGORY: III
CUSTOM CODE: 42032910
ORIGIN: CE


The exposure to very low temperature can cause damages similar to burns. For this reason, cold resistant gloves and accessories should be manufactured with highly insulating materials. Ideal for extreme cold situations, related to industrial activities or climatic conditions. They can be employed during mechanical activities, carpentry, transport and construction, for low temperature down to -50° according to EN 511.

In presence of liquid nitrogen and other cryogenic gases, we design PPE with long-lasting insulating properties and high level of dexterity and waterproof. They prevent hazards caused by contact cold and burns in case of leakage or splashes of liquid gases, in industrial or laboratory activities. These PPE have been tested with contact with liquid nitrogen (-195,32°C) for one minute and following flexibility test (RCT method).

Applications:

  • Outdoor activities 
  • Cold rooms and storage facilities 
  • Cryogenic laboratories: biology, medical technologies, scientific research 
  • Burns prevention in case of liquid gases leakage 
  • Cryoblasting 
  • Cryogenic hardening
  • Transport, loading, storage, pouring of liquid gases


In compliance with:

  • EN 388 Protective gloves against mechanical risks
  • EN 511 Protective gloves against cold
  • Cryogenic use: specific test for resistance to liquid nitrogen (-195,32°C)

Do not dive directly in liquid nitrogen.

CRYOKIT® is a Kora registred trademark.

 


CHARACTERISTICS AND MATERIALS

 

Palm Waterproof full grain leather
Back Waterproof full grain leather
Cuff Split leather cuff with velcro
fastener
Membrane Porelle® - waterproof and breathable
Lining Polyester fabric
Seams Nylon
    • SKU
      CRYOLITE-HP-8
    • Commodity Codes
      42032910
  • Manufacturer
    Coval Cold
  • Country of Origin
    Italy
  • Sizes Available To Order
    8, 9, 10, 11
  • Length (cm)
    38