Daicel 12025 CHIRALCEL OB Coated Polysaccharide Derivative Analytical HPLC Chiral Column, 4.6mm, 250mm, 10µm

Not rated yet
Free Mainland UK Shipping

The surface of the silica gel is coated with cellulose-tribenzoate

OB is a polysaccharide derivative positive phase coated chiral column, and the surface of the silica gel is coated with cellulose-tribenzoate.

OB is currently the most widely used chiral filler in the world. The excellent separation ability and tolerance of OB column have been reported in various literatures.

CHIRALCEL ® OB-H / CHIRALCEL ® OB is used in the normal phase mobile phase.

  • £1760.00
In Stock:  
Filler particle size

CHIRALCEL ® OB-H: 5μm

CHIRALCEL ® OB: 10μm

pressure

In order to extend the service life of the chiral column, it is recommended to keep the pressure below 30MPa.

(For CHIRALCEL ® OB columns, please keep the pressure below 10MPa)

temperature0~40°C
Storage solvent

n-Hexane/2-Propanol = 90/10 (v/v)


Column Care

  • The use of a guard column is highly recommended for maximum column life. 
  • Samples should be dissolved in the mobile phase and should be filtered through a membrane filter of approximately 0.5µm porosity. 
  • The mobile phase should be displaced with Storage Solvent (Hexane / 2-propanol 9:1) when stored for more than one week. 
  • When washing is required, use pure Ethanol at an appropriate flow rate for 3 hours. 


Important Notice

STRONGLY BASIC solvent modifiers or sample solutions MUST BE AVOIDED, because they are likely to damage the silica gel used in this column.

    • SKU
      12025
    • Commodity Codes
      90279050
  • Manufacturer
    Chiral Technnologies (Part of Daicel Group)
  • Country of Origin
    Japan
  • Chromatography HPLC or GC
    • Particle size (µm)
      10
    • Internal Diameter (mm)
      4.6
    • Length (mm)
      250
    • Temperature range (°C)
      0 ~ 40 ℃
    • Packing Phase
      CHIRALCEL ® OB