Binder 9020-0336 KBWF240 Standard, 247 Litres, Series KBWF, Growth chambers with light and humidity, KBWF240-230V, 200…240 V 1 50 Hz

Homogeneous light in combination with a constant temperature and humidity is necessary to achieve ideal growth in plants or other organisms. A BINDER humidity chamber offers all this. This is how KBW Series growth chambers create ideal conditions for the culture using light and temperature. The KBF series also offers a system for humidity regulation.

The APT.line™ preheating chamber from BINDER, in connection with fast-reacting humidity regulation, highly effective cooling and uniform light distribution, ensures natural growth conditions.

Important characteristics

  • Temperature range: 0 °C to 70 °C
  • Temperature range with light: 10 °C to 60 °C
  • Humidity range: 10 % to 80 % RH
  • 2 positionable illumination cassettes, each with 5 fluorescent tubes
  • APT.line™ preheating chamber technology
  • Adjustable fan speed
  • Humidity regulation with capacitative humidity sensor and vapor humidification
  • Controller with time-segment programming
  • Display via color LCD monitor
  • 2 stainless steel racks
  • Access port with silicone plug, 30 mm, left
  • Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
  • Computer interface: Ethernet
  • Door heating

    • 20% off
    £18018.00, save £3603.60
  • £14414.40

Climate chambers for ideal growth conditions

Climate chambers from BINDER provide the ideal growth conditions for plants and other organisms. It is possible to accurately simulate natural climate conditions in these state-of-the-art growth chambers, which BINDER offers in two different versions: climate chambers with light (KBW series) and climate chambers with light and humidity (KBWF series).
The perfect climate is created in BINDER climate chambers through extremely low climate gradients thanks to responsive vapor pressure humidification. There is a uniform, gentle flow of air in the interior, even when the units are fully loaded. Unique homogeneous light distribution is another feature of these climate chambers, which are equipped with a patented light system and illumination cassettes that can be positioned variably and have fluorescent tubes. Light is thereby distributed evenly across the entire usable space of the growth chambers. The climate chamber temperature can be adjusted within a range of 0 °C to 70 °C, with the temperature being displayed accurately at increments of a tenth of a degree and the humidity at increments of a tenth of a percent within the KBWF series.

BINDER climate chambers for high performance and ease of handling

BINDER climate chambers feature a reliable decontamination concept and are incredibly simple to clean owing to the stainless steel interior. Ease of handling is also guaranteed for all laboratory tasks.

BINDER climate chambers are extremely versatile, being suited to applications within the cosmetics, pharmaceutical and chemical, and timber and forestry industries as well as the field of plant biotechnology. Homogeneous lighting conditions are combined with constant temperature and humidity conditions to guarantee optimum growth of a wide range of organisms. With an extensive product portfolio and optional accessories, a wide range of applications is covered. Manufactured in Germany, all BINDER climate chambers are characterized by a stable, robust, and durable quality along with excellent usability and high performance you can rely on.

Option modelStandard
Order number9020-0336
Interior volume [L]247
Net weight of the unit (empty) [kg]214
permitted load [kg]100
Load per rack [kg]30
Inner doors1
Unit doors1
Internal Dimensions
Width [mm]650
Height [mm]785
Depth [mm]485
Outer dimensions
Width net [mm]925
Height net [mm]1465
Depth net [mm]800
Wall clearance sidewise [mm]100
Wall clearance back [mm]100
Environment-specific data
Energy consumption at 37 °C and 75 % RH [Wh/h]760
Sound-pressure level [dB(A)]53
Number of shelves (std./max.)2/7
Number of illumination cassettes (std./max.)2/2
Performance Data Temperature
Temperature range without illumination cassettes [°C]0…70
Temperature range with 100% illumination [°C]10…60
Performance Data Climate
Temperature range without illumination cassettes [°C]10…70
Temperature range with 100% illumination [°C]10…60
Humidity range without illumination [% RH]10…80
Humidity range with illumination cassettes, with illumination [% RH]10…75
Lightdata per Illumination Cassettes
Daylight tubes [W/m²]*24
Daylight tubes [lx]*9000
Fluora® growth lamps [W/m²]*23
Fluora® growth lamps [lx]*7500
Arabidopsis lamps [W/m²]*32
Arabidopsis lamps [lx]*11000
Electrical data
Rated Voltage [V]200…240
Power frequency [Hz]50
Nominal power [kW]2.4
Unit fuse [A]16
Phase (Nominal voltage) [ph]1
  1. All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10 %. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. Technical data refers to 100 % fan speed. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.
* Average value, measured at 25 °C with a spherical sensor (±10 %) by 12 cm below the light cassette. The values given in W/m2 refer to global radiation.
    • SKU
    • Commodity Codes
  • Capacity (L)
  • Temperature Range °C
    0 °C to 70 °C
  • Chamber
    Stainless Steel
  • Exterior Finish
    White Polyester Powder Coated Steel
  • Dimensions (mm)
    650 x 785 x 485
  • Manufacturer

DesignationDescriptionArt. No.

Access port with silicone plug
30 mm
30 mm
30 mm
50 mm
100 mm
50 mm
50 mm
Alarm output, zero-voltage
for temperature (±2 °C) and humidity (±5 % RH), accessible via 6-pin DIN socket (max. 24 V - 2.5 A), with audible signal that can be switched off
Analog output 4-20 mA
for temperature and humidity values (output not adjustable)
Arabidopsis illumination cassette
fluorescent tube set for replacement of daylight fluorescent tubes
17 W option model
System for preparation or complete desalination of tap water, complete set containing PURE AQUA 300 single-use cartridge, measuring device, and all necessary connecting parts
PURE AQUA 300 single-use replaceable cartridge for the BINDER PURE AQUA SYSTEM, filter capacity approx. 700 liters (for a conductivity of 200 μS/cm = 6.6 °dH)
PURE AQUA 600 single-use replaceable cartridge for the BINDER PURE AQUA SYSTEM, filter capacity approx. 1,400 liters (for a conductivity of 200 μS/cm = 6.6 °dH)
Calibration certificate, expanded
for temperature and humidity; for extending the measurement in center of chamber to include another test value
Calibration certificate, temperature
temperature measurement incl. certificate, 9 measuring points at specified temperature
temperature measurement incl. certificate, 15- 18 measuring points at specified temperature
temperature measurement incl. certificate and 27 measuring points at specified temperature
Calibration certificate, temperature and humidity
Measurement in center of chamber at 25 °C / 60% RH or at specified test values
temperature (according to DIN12880) and humidity measurement incl. certificate, 27 temperature measuring points and 1 humidity measuring point, at 25 °C / 60 % RH or at specified values
Class 3.3 independent temperature safety device
with visual alarm (DIN 12880)
230 V option model
Data Logger Kit
T 220: For continuous temperature logging from -90 °C to 220 °C. The kit includes 1 data logger, Pt 100 sensor with 2 m extension cable and 1 magnetic fixture for mounting to the BINDER unit
TH 70: For continuous temperature and humidity logging from -40 °C to 70 °C; 0% to 100% RH. Kit includes 1 data logger, Pt 100 sensor with 2 m extension cable, and 1 magnetic fixture for mounting to the BINDER unit
TH 70/70: For continuous temperature and humidity logging from -40 °C to 70 °C / 0% to 100% RH and additional logging of ambient conditions. Kit includes 1 data logger, 2 attachable combined humidity/temperature sensors, 2 m extension cable and 1 fixture for mounting to the BINDER unit
Data Logger Software
LOG ANALYZE software kit, configuration and evaluation software for all BINDER Data Logger Kits (incl. USB data cable)
Door lock
lockable door handle
FLUORA® illumination
Illumination cassettes equipped with FLUORA® fluorescent tubes instead of daylight fluorescent tubes
Interface converter
RS 422 cable set and RS 232 / RS 422 interface converter for connection to 10-way plug distributor or for connection to a unit
230 V, 50/60 Hz option model
Interface converter, USB / RS422
RS 422 cable set and RS 422 / USB interface converter for connection to 10-way plug distributor or for connection to a unit (USB-powered converter)
Light photometry
including certificate, illumination and irradiance for visible light and UV-A, 25 measuring points on 3 measurement levels, as well as spectral distribution (250 – 785 nm)
pH-neutral detergent
concentrated, for gentle remove of residual contaminants; 1 kg
Pt 100 temperature sensor
additional flexible Pt 100, interior, for displaying the temperature on the unit display
Rack accessories
Rack accessories – fasteners (1 set of 4) for additional security of racks
Rack, reinforced
stainless steel, with fasteners (1 set of 4), max. load 70 kg
stainless steel
RS 422 interface
in place of Ethernet, for communication software
RS 422 interface, accessories
RS 422 connection cable (15 m) between plug distributor and RS 422 interface
RS 422 extension cable (50 m) between interface converter and unit or RS 232 / RS 422 plug distributor
modular plug distributor for 10 RS 422 interfaces
RS 485, 2-wire
Additional serial interface can be used parallel to Ethernet, for communication software
Shelf, perforated
stainless steel
Stainless steel
Shelf, reinforced
positioned at bottom level, max. load 67 kg, with additional attachment for operation of shaking device, stirring device or roller bottle system
APT-COM™ communications software, price: for free
version 3, GLP DEMO Edition
APT-COM™ communications software
version 3, STANDARD edition
APT-COM™ communications software
version 3, BASIC edition
APT-COM™ communications software
version 3, GLP edition
APT-COM™ communications software
version 2 to 3, GLP edition
Water supply set
external, consisting of fresh- and waste-water containers (20 liters each), cabling and pump