Binder 9010-0175 FP 53 Standard, Drying and Heating Chambers with Forced Convection, 53 Litre Capacity, FP053UL-120V, 120 V 1~ 60 Hz

Specifications

Designation

FP053UL-120V¹

Option modelStandard
Order number9010-0175
Data
SerieFP
Performance Data Temperature
Heating-up time to 150 °C [min]24
Recovery time after 30 seconds door open at 150 °C [min]5
Temperature fluctuation at 150 °C [± K]0.3
Temperature range +5 °C above ambient temperature to300 °C
Temperature variation at 150 °C [± K]2
Air change data
Air change (approx.) at 150 °C [x/h]64
Electrical data
Nominal power [kW]1.2
Phase (Nominal voltage)1~
Power frequency [Hz]60
Rated Voltage [V]120
Unit fuse [A]16
Housing dimensions not incl. fittings and connections
Depth net [mm]575
Height net [mm]620
Width net [mm]635
Internal Dimensions
Depth [mm]340
Height [mm]400
Width [mm]400
Measures
Interior volume [L]53
Load per rack [kg]15
Net weight of the unit (empty) [kg]44
Permitted load [kg]40
Wall clearance back [mm]160
Wall clearance sidewise [mm]100
Environment-specific data
Energy consumption at 150 °C [Wh/h]300
Fixtures
Number of shelves (std./max.)2/5
  1. All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10 %. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. Technical data refers to 100 % fan speed. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.
    • 25% off
    £2348.00, save £587.00
  • £1761.00
Qty:  

Series FP Classic.Line | Drying and heating chambers with forced convection and program functions

A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.

Benefits

  • Uniform drying conditions thanks to APT.line™ technology
  • Identical test conditions throughout the chamber interior independent of sample size and quantity
  • Outstanding thermal insulation saves operation costs
  • Advanced programming options

Important characteristics

  • Temperature range: +5 °C above ambient temperature to +300 °C
  • APT.line™ preheating chamber technology
  • Adjustable fan speed
  • Adjustable exhaust air flap
  • Controller with time-segment and real-time programming
  • 2 chrome-plated racks
  • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
  • Computer interface: RS 422

Heating chambers with forced convection and program functions

BINDER has a range of heating chambers in different versions, precisely tailored to suit specific requirements and tasks. In its Classic.Line FP series, BINDER has developed extremely complex temperature testing chambers, which also meet high quality standards and offer a broad variety of programming options. The forced convection provides short drying times and fast heating up times, which is a real benefit, especially when chambers are fully loaded.
BINDER heating chambers with forced convection and program functions in the FP series are powerful and extremely accurate. They can be operated within a temperature range of between 5 °C and 300 °C. Heating chambers in the FP series boast almost unlimited adjustment opportunities, with the option to program temperature cycles, the fan speed setting for each program interval, the weekly program timer, and the real-time clock of the controller.


    • SKU
      9010-0175
    • Commodity Codes
      90278017
  • Temperature Range
    +5 °C above ambient temperature to +300 ° C
  • Volume (litres)
    53
  • Dimensions: External H x W x D (mm)
    400 x 400 x 340
  • Air Circulation
    Fan Assisted Convection
  • Manufacturer
    BINDER GmbH


DesignationDescriptionArt. No.

Access port with silicone plug

left

100 mm
8012-1510

right

100 mm
8012-1507

top

100 mm
8012-1389

back

50 mm
8012-1386

top

50 mm
8012-1382

left

50 mm
8012-1378

right

50 mm
8012-1374

back

30 mm
8012-1370

top

30 mm
8012-1366

left

30 mm
8012-1362

right

30 mm
8012-1357

back

10 mm
8012-1286

left

10 mm
8012-1279

right

10 mm
8012-1272

top

10 mm
8012-1265
Analog output 4-20 mA

for temperature values (output not adjustable)

8012-0481
Calibration certificate, expanded

for temperature; for extending the measurement in center of chamber to include another test temperature

8012-1119
Calibration certificate, temperature

temperature measurement incl. certificate and 27 measuring points at specified temperature

8012-1597

temperature measurement incl. certificate, 15- 18 measuring points at specified temperature

8012-1576

temperature measurement incl. certificate, 9 measuring points at specified temperature

8012-1555

for temperature, measurement in center of chamber at specified temperature

8012-1138
Cart

Cart – stable cart, casters with locking brakes, dimensions: W 1,000 x D 800 x H 780 mm

9051-0018
Class 3.1 independent temperature safety device

with visual alarm (DIN 12880)

8012-1149
Data Logger Kit

T 350: For continuous temperature logging from 0 °C to 350 °C; kit includes 1 data logger, Pt 100 sensor with 2 m extension cable and 1 magnetic fixture for mounting to the BINDER unit

8012-0714
Data Logger Software

LOG ANALYZE software kit, configuration and evaluation software for all BINDER Data Logger Kits (incl. USB data cable)

8012-0821
Door gasket

made of FKM, silicone-free

8012-0494
Door lock

lockable door handle

8012-1249
Fan, reinforced

to increase air change rates

230 V option model
8012-0197
Gas-tight option model

incl. additional measures for gas containment

8012-0182
HEPA air filter

On fresh air supply for unit; filter classification H14 (acc. to. EN 1822-1:2009, > 99.995% at 0.3 µm)

8012-1169
Inert gas connection

with gas inlet and outlet, Ø 10 mm, incl. additional measures to provide the greatest possible impermeability to gas

8012-0841
Instrument tray

with lid made from 18/8 stainless steel, stackable, dimensions: 315 x 215 x 60 mm

large
4022-0124

with lid made from 18/8 stainless steel, stackable, dimensions: 230 x 133 x 45 mm

small
4022-0123
Interface converter

RS 422 cable set and RS 232 / RS 422 interface converter for connection to 10-way plug distributor or for connection to a unit

120 V, 60 Hz option model
8012-0557

RS 422 cable set and RS 232 / RS 422 interface converter for connection to 10-way plug distributor or for connection to a unit

230 V, 50/60 Hz option model
8012-0556

RS 422 cable set and RS 422 / Ethernet interface converter for connection to 10-way plug distributor or for connection to a unit

120 V, 60 Hz option model
8012-0405

RS 422 cable set and RS 422 / Ethernet interface converter for connection to 10-way plug distributor or for connection to a unit

230 V, 50/60 Hz option model
8012-0380
Interface converter, USB / RS422

RS 422 cable set and RS 422 / USB interface converter for connection to 10-way plug distributor or for connection to a unit (USB-powered converter)

8012-0665
Measurement of air exchange rate

in accordance with ASTM D5374, definition and protocol according to ambient temperature

8012-1198
pH-neutral detergent

concentrated, for gentle remove of residual contaminants; 1 kg

1002-0016
Pt 100 temperature sensor

additional flexible Pt 100, interior, for displaying the temperature on the unit display

8012-0504
Rack

stainless steel

6004-0007

chrome plated

6004-0002
Rack accessories

Rack accessories – fasteners (1 set of 4) for additional security of racks

8012-0531
RS 422 interface

modular plug distributor for 10 RS 422 interfaces

8012-0295
RS 422 interface, cable (15 m)

RS 422 connection cable (15 m) between plug distributor and RS 422 interface

5023-0036
RS 422 interface, cable (50 m)

RS 422 extension cable (50 m) between interface converter and unit or RS 232 / RS 422 plug distributor

5023-0117
Rubber pads

set of 4 anti-slip feet, for safe stacking of unit

8012-0001
Shelf, perforated
Stainless steel
6004-0029
Software

APT-COM™ communications software

version 2 to 3, GLP edition
9053-0016

APT-COM™ communications software

version 3, GLP edition
9053-0015

APT-COM™ communications software

version 3, BASIC edition
9053-0014

APT-COM™ communications software

version 3, STANDARD edition
9053-0013

APT-COM™ communications software, price: for free

version 3, GLP DEMO Edition
9053-0008
Viewing window and interior lighting

viewing window in door, 230 x 230 mm, and 15 W interior lighting

120 V option model
8012-0237

viewing window in door, 230 x 230 mm, and 15 W interior lighting

230 V option model
8012-0054
Zero voltage relay contacts

for controlling 3 relay contacts via program regulators, accessible via 6-pin DIN socket (max. 24 V - 2.5 A)

120 V option model
8012-0472

for controlling 3 relay contacts via program regulators, accessible via 6-pin DIN socket (max. 24 V - 2.5 A)

230 V option model
8012-0471