Astell Scientific AMB240BT Benchtop Autoclave, 63 Litres, Autofill Steam Source, Single Phase 230 volts, 13 Amps, 50/60Hz

Not rated yet

Astell’s front loading Benchtop autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply.

‘Classic’ and ‘Autofill’ models are available.

Classic - The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.

Autofill - The ‘Autofill’ version has an integral reservoir. Once filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle.

 

 
Model NoSteam SourceVolume
(Litres)
Power SupplyChamber dia x depth (mm)Overall Dims wxhxd (mm)
AMB240BTAutofill63Single Phase 230 volts, 13 Amps, 50/60Hz350 x 660520 x 540 x 980


The AMB240 is rated at 3kW. The heat dissipation is estimated at 0.5kWh or approximately 1,700 BTU for an overall cycle time of 3½ hours.

Price Upon Application Or Discontinued

Ecofill benchtop autoclave:

The ‘Ecofill’ version has an integral reservoir and an in-built 'autofill' water re-circulation system. Once the reservoir is filled, this provides water for up to 15 cycles, and also acts as a collection vessel for condensate and the water that is automatically returned from the chamber at the end of each cycle, minimising water usage.

Classic benchtop autoclave:

The ‘Classic’ version requires manual water-fill and during the cycle condensate leaves the vessel via a silicone tube that can be connected to a heat-resistant bottle.

FEATURES

  • A choice of 33, 43 and 63 litre models
  • Self contained design with no installation required - just fill it with water and plug it in and the machine is ready to be used
  • No mains water supply or drain necessary
  • Fully programmable 5.7" Colour Touch Screen controller
  • Five pre-programmed cycles and up to 50 available
  • Five password levels to stop lower level users making changes
  • FDA 21 CFR part 11 software option available
  • USB interface for downloading controller data
  • Temperature range of 100°C to 138°C (0.2 - 2.4 Bar)
  • Timed/Pulsed Free Steaming
  • Holdwarm / Delayed Start feature
  • 316 stainless steel electropolished chamber
  • Base shelf within the chamber
  • Fast action door closure mechanism
  • Validation Port
  • Cooling Lock
  • Over Temperature Protection
  • Pressure Gauge
  • Calibration and Validation available
  • Optimised for low water and power consumption
  • Standard Astell safety features
    • SKU
      AMB240BT
  • Manufacturer
    Astell Scientific Ltd