Atago 3533 In-line Salinity Concentration Monitor, CM-800α-SW, Salinity : 0.0 to 28.0% Measurement Range

Not rated yet
0

 

Simplicity at its best - Versatile Process Management

 This is an in-line refractometer for concentrations of sodium chloride in water. 
 
Specifications


ModelCM-800α-SW
Cat.No.3533
RangeSalinity : 0.0 to 28.0%
Temperature : -15 to 160゚C / 5 to 320゚F
ResolutionSalinity : 0.01 or 0.1%
(2nd decimal place shown per selection for 0.00 - 9.99%)

Temperature : 1゚C / 1゚F
AccuracySalinity : ±0.1%
Temperature : ±1゚C / ±2゚F
Temperature compensation5 to 100゚C
Output(1) DC 4 to 20mA
(2) RS-232C output
Power SupplyDC24V

[*1] : The cable can be ordered to a custom length of up to 5m.



 
 
Call 01463 830401 For Any Assistance
  • In-line model can be incorporated into the piping of manufacturing plants, liquid mixing devices, and washing apparatuses for continuous liquid concentration measurement
  • Automatic temperature compensation (ATC) for immediate, accurate calibration readings, regardless of sample temperature

Salinity (/səˈlɪnɪti/) is the saltiness or amount of salt dissolved in a body of water, called saline water (see also soil salinity). This is usually measured in 

 (note that this is technically dimensionless). Salinity is an important factor in determining many aspects of the chemistry of natural waters and of biological processes within it, and is a thermodynamic state variable that, along with temperature and pressure, governs physical characteristics like the density and heat capacity of the water.

A contour line of constant salinity is called an isohaline, or sometimes isohale.

Highly resistant to build-up 

The materials in contact with the solution are made out of durable SUS316L, and the sample stage has been made fully flat, resulting in a unit that's highly resistant to build-up.


Defective products will never slip through 

A variety of output methods means defective products will never slip through undetected. Recorder output (4-20mA) and RS-232C output can be set-up and linked with an external device for automatic control. 


Compatible with a wide range of temperatures 

Capable of measurement at temperatures between -15 to 160°C, meaning the unit is perfectly capable of handling CIP and SIP processes.




 α series Fitting Option

Connection systemDiameterProfile
IDF/ISO clamp union (ferrule)1S - 3S
IDF/ISO screw union (screw)1S - 3S
JIS Flange25A - 65A
IDF/ISO clamp union (ferrule)1S - 3S
IDF/ISO screw union (screw)1S - 3S
JIS Flange25A - 65A
Compression Fitting10mmΦ
Hose connector12mmΦ
    • SKU
      3533
    • Commodity Codes
      90275000
  • Range
    Salinity : 0.0 to 28.0%
  • Accuracy
    ±0.1%
  • Type of Communication
    DC4 to 20mA Output, RS-232C Output Terminal
  • Installation Type
    In-line
  • Use
    Salinity
  • International Protection Class
    IP67
  • Manufacturer
    Atago Co Ltd
  • Country of Origin
    Japan