2mag 63825 STIRRING DRYBATH 8-250 ERL 8 Position Stirring Heating Block System, 100 - 2,000 rpm Speed Range, 1 - 250 ml Capacity, +40 °C up to +200 °C Temperature Range

  • Inclusive separate control unit for operation of magnetic stirrer and integrated heater, for long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, stainless steel housing. Inclusive 8 contact adapters for an optimized heat transfer

Stirring-Heating Blocks

For viscosity measurements, R&D, combinatorial chemistry, biological applications, testing the solution behavior of synthetic materials, quality control in food, chemical and waste water technology, simple and easy system integration.


Specifications

 

Type STIRRING DRYBATH 8 -250 ERL
Stirring positions 8
Stirring positions distance 100 mm/140 mm
Bore holes Ø/T Ø 87.2 / 78 mm
Stirring volume / stirring point 1 - 250 ml
Stirring power (max.) 40 W
Power setting 10 - 100% (10-step)
Temperature range +40 °C up to +200 °C
Speed range 100 - 2,000 rpm
Operating voltage 230 V
Heating power (max.) at 230 V 1,150 W
Dimensions (WxDxH) 335 x 515 x 150 mm
Protection category IP20
Weight (gross) approx. 40 kg
Order no. 63825

Customized versions and modified unit sizes on request.
3 years warranty on material and manufacturing.

Customized versions and modified unit sizes on request.
3 years warranty on material and manufacturing.

  • £11870.00
Qty:  

Stirring-heating block combination with 8 stirring positions, 8 bore holes, ø 87.2 mm, depth 78 mm, suitable for 250 ml Erlenmeyer flasks.

Stirring - Maintenance-free and wear-free by inductive 2mag-Magnetic Drive concept, extremely wide speed range of 100 to 2,000 rpm, 100% synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.

STIRRING-DRYBATH-8-250-ERL-Product

Heating - Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, contact adapters for an optimal heat transfer, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximum heating temperature +200 °C, PowerDetect for automatic compensation of physically determined loss in stirring power which can come up to 40% at high temperatures, specially made insulated stainless steel frame for energy- and time saving heating process, additionally for a homogenous temperature distribution and protection against accidental contact, independent over-temperature protection inside the plate.

Type DRYBATH 15-100 DRYBATH 15-250 DRYBATH 8-250 ERL
Stirring positions 15 15 8
Stirring positions distance 65 mm 84 mm 100 mm/140 mm
Bore holes Ø/T Ø 57.5 / 48 mm Ø 71.5 / 78 mm Ø 87.2 / 78 mm
Stirring volume / stirring point 1 - 150 ml 1 - 400 ml 1 - 250 ml
Stirring power (max.) 40 W
Power setting 10 - 100% (10-step)
Temperature range +40 °C up to +200 °C
Speed range 100 - 2,000 rpm
Operating voltage 230 V
Heating power (max.) at 230 V 1,000 W 1,150 W
Dimensions (WxDxH) 280 x 430 x 120 mm 335 x 515 x 150 mm
Protection category IP20
Weight (gross) approx. 20 kg approx. 35 kg approx. 40 kg
Order no. 63100 63250 63825

Customized versions and modified unit sizes on request.
3 years warranty on material and manufacturing.


    • SKU
      63825 - 2MAG
  • Manufacturer
    2mag AG
  • Dry Block Heaters
    • Number of blocks
      8
    • Heat output
      1150 W
    • Set-up plate dimensions
      335 x 515 x 150 mm
    • Heating temperature range
      +40 °C up to +200 °C

Recommended Accessories